I'm running a 1kz-te in a LJ70 or bundera on a manual box. So far so good and no major problems. The engine is standard, no intercooler or add on gimmicks like boost controllers.
One thing I am worried about is the engine heat. Seems to be giving off some degrees!! The temp sensor is always stable at about 50% and no higher.
Is there anything I can do to get rid of the hot air? Or blow some colder air through to the engine?
Perhaps following:
1. Oil Cooler
2. Bonnet scoop (but I hate them)
3. Electric Fan....but retain the clutch fan
4. Anything else??/
Oh, and just to add, I am in a tropical climate. Average daily temp 31 degC.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Keeping a 1KZ-te cool.....................
Moderators: toaddog, Elmo, DUDELUX
That sounds about right sitting on half. In all the late model hiluxs i have owned or delt with they have all sat on half from new while being driven in temps from -5 to near 50 degrees. That temp will be what the thremostat keeps it at.
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
On most hiluxs/4runners/surfs there is a dead spot on the temperature gauge. The temp gauge will creep up to half way and no further attention is paid to it. I own a surf fitted with the 1kt-t and what is displayed on the gauge is not what's really happening
There is a mod that can be done so that the gauge gives real and accurate figures of what's happening with your engine temps. Once the mod is done it's pretty freaky how much it moves around and where it peaks under load.
Below is the link for the temp gauge mod if anyone is interested.
http://toyotasurf.asn.au/forum/viewtopic.php?t=14717
I"ve also noticed how much heat is generated from the motor and realistically a bonnet scoop is probably the best way of forcing extra cool air into the hot environment. Oil cooler would also help. I'm toying with a few ideas and will see how they come along.
Cheers.
There is a mod that can be done so that the gauge gives real and accurate figures of what's happening with your engine temps. Once the mod is done it's pretty freaky how much it moves around and where it peaks under load.
Below is the link for the temp gauge mod if anyone is interested.
http://toyotasurf.asn.au/forum/viewtopic.php?t=14717
I"ve also noticed how much heat is generated from the motor and realistically a bonnet scoop is probably the best way of forcing extra cool air into the hot environment. Oil cooler would also help. I'm toying with a few ideas and will see how they come along.
Cheers.
94 Surf ssr-x Ltd 3.0td
3 years. 3 states. Not movin anymore
3 years. 3 states. Not movin anymore
Excellent advice about the temp gauge. I'll give that mod a go as given in the url.shamozzle wrote:On most hiluxs/4runners/surfs there is a dead spot on the temperature gauge. The temp gauge will creep up to half way and no further attention is paid to it. I own a surf fitted with the 1kt-t and what is displayed on the gauge is not what's really happening
There is a mod that can be done so that the gauge gives real and accurate figures of what's happening with your engine temps. Once the mod is done it's pretty freaky how much it moves around and where it peaks under load.
Below is the link for the temp gauge mod if anyone is interested.
http://toyotasurf.asn.au/forum/viewtopic.php?t=14717
I"ve also noticed how much heat is generated from the motor and realistically a bonnet scoop is probably the best way of forcing extra cool air into the hot environment. Oil cooler would also help. I'm toying with a few ideas and will see how they come along.
Cheers.
The bonnet could be raised 1/2" to 1" at the hinges by putting spacers there. I had that on my 2lt. That gives a large area for the heat to escape.
I had robs with my '94 surf and 1KZTE overheating (auto). Tracked it to the fan clutch. Silicon Oil fixed i perfectly. Falt throttle up the soft sand after that, no worries.
If the gauge says it's OK, and the gauge works, I wouldn't worry.
Paul
If the gauge says it's OK, and the gauge works, I wouldn't worry.
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Did the same thing on mine.Spent the coin on a new viscous hub from Toyota as the bi-metallic spring on my old one was shagged. Installed an 8 blade fan from a 1hz and has kept the engine temps down even under extreme load. The 1hz fan moves heaps more air through the radiator and engine bay. A few guys on the surf site are doing these mods and having favourable outcomes.me3@neuralfibre.com wrote:I had robs with my '94 surf and 1KZTE overheating (auto). Tracked it to the fan clutch. Silicon Oil fixed i perfectly. Falt throttle up the soft sand after that, no worries.
If the gauge says it's OK, and the gauge works, I wouldn't worry.
Paul
Cheers.
94 Surf ssr-x Ltd 3.0td
3 years. 3 states. Not movin anymore
3 years. 3 states. Not movin anymore
Who is online
Users browsing this forum: No registered users and 0 guests