Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mickey Thompson Tyres

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Mickey Thompson Tyres

Post by NIK »

Im trying to find the ACTUAL size of a 35 claw, the only new tyres I could measure were 31atz and they were 29!
So would that mean the 35 is only 33?
Couldnt find there website and the only info I could find was 35"to mm not actual size.
Nik
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 56
Joined: Thu May 20, 2004 7:37 pm
Location: Sydney

Post by Antz »

The overall diameter sizes quoted on the website are just conversions from the sizes on the sidewall. The true sizes will be less.

My 37" bias claws measured under 36" when new :roll:
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

my 35 bias claws measure about 33.5"
Its a wheelbase thing
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

I measured some 315/75-16 MTZ's which measured up at 33" also instead of something around 35".
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

33" radial claws are only 32" :roll:
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Yep found the conversion from inches to mm but unfortunatley they arnt true sizes. I would expect somewhere around 34 but like I said 31 only measured 29 wtf??
MaybeI should just ring and ask them to run a tape across a 35 radial for me?
Thanks for the input.
Nik
Posts: 23
Joined: Thu Jan 24, 2008 5:14 pm
Location: Newcastle

Post by ChrisV »

I haven't measured mine but my 38.5 inch Baja Claws are a bit bigger than my 38.5 Super Swamper SX's when put side by side.

The Interco website says the OD of the super swampers are actually 38.5"
http://www.intercotire.com/site30.php

So I guess my 38.5 Claws are a bit bigger than 38.5"????

Hope this helps....
- TEAM JACK IT UP AND RUN OVER SHIT -

FJ40 - Lexus V8, 38.5x16r15 Baja Claws, front lokka, rear LSD - None of it fitted to the car yet....
Posts: 23
Joined: Thu Jan 24, 2008 5:14 pm
Location: Newcastle

Post by ChrisV »

You guys are shithouse!!!!

Everything you ever wanted to know and more....

http://www.mickeythompsontires.com/truc ... ClawRadial
- TEAM JACK IT UP AND RUN OVER SHIT -

FJ40 - Lexus V8, 38.5x16r15 Baja Claws, front lokka, rear LSD - None of it fitted to the car yet....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ChrisV wrote:You guys are shithouse!!!!

Everything you ever wanted to know and more....
Yes, but thats their own measurements, which according to others are wrong to start with. They arent going to say their 35's are 33 are they?
Posts: 357
Joined: Fri Nov 07, 2003 3:30 am
Location: Mount Beauty

Post by Trusa »

Rough measurement of my 35x12.5r15 Radial Claws on the Hilux measured from 9 oclock to 3 oclock on 10" rims is 34" with about 30,000km of use.
Posts: 23
Joined: Thu Jan 24, 2008 5:14 pm
Location: Newcastle

Post by ChrisV »

True
- TEAM JACK IT UP AND RUN OVER SHIT -

FJ40 - Lexus V8, 38.5x16r15 Baja Claws, front lokka, rear LSD - None of it fitted to the car yet....
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

my 37s measure 36.5 atm
micky claws radial
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

US people can't convert for crap anyway.

1 inch is meant to be 25.4mm most US people just use 25mm.

they also don't convert feet into metric either, so your properly getting their version of a 31inch metric tire.

that and simply you'll never get a proper sized tire due to production problems anyway same for rims they'll never be a true circle.
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Im wanting to know as my engineers cert says 33s and I can get agood deal on new 35 claws. But then i,ll have to reengineer it so I dont want to go through all that trouble for a 35" tyre that only measures 33".
My 33" worn bfgs are about 31 1/2 atm.
Nik
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

NIK wrote:Im wanting to know as my engineers cert says 33s and I can get agood deal on new 35 claws. But then i,ll have to reengineer it so I dont want to go through all that trouble for a 35" tyre that only measures 33".
My 33" worn bfgs are about 31 1/2 atm.
Nik
It goes on whats marked on the sidewall - not what they measure.
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

I know that thats why Im trying to find out the actual size.
Its no point getting a GREAT deal on new 35s and reengineering it if they only measure 33. it would be easier to just buy a true 33 like maxxis and no need to reengineer if that makes sense?
Nik
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

i"ve measured half worn 38inch super swampers mounted on 15 x 8 steelies, off the vehicle, at 910mm { just 36 inches }. 2 inches short & they definetly hadn"t lost 2 inches off the tread.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

steel, ive just measured some nearly bald 37 boggers which measure 35.9 and the spare was 36.9. on 10s. and some 33 tsls which were on 15x8s that were only an inch shorter. i think tsls differ hugely epending on rims.

the 35 bias claws i had measured 33.
turbos are nice but i'd rather be blown
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

when i put my 33" claws on my old bus, i sat them next to my old hankook 33"s and the claws sat a good inch taller... mind you, the hankooks had worn down to bugger all...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

The swampers i measured were"nt the ones with the tread coming around the sidewalls, { don"t know if they are TSL"s or not ]. I suppose rim width may effect a tires rolling diameter. My michelins measured pretty much the same on 5.5 inch splitties as on 8 inch sunnies.
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

I,l have to get them to measure to be 100% but spoke to the enginner and he said no problem.
Nik
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

Antz wrote:The overall diameter sizes quoted on the website are just conversions from the sizes on the sidewall. The true sizes will be less.

My 37" bias claws measured under 36" when new :roll:
Mine on a 10" rim were more like 36.5 when almost new

Hope nobody's quoting the height of the tyre when fitted to the car :?
Posts: 214
Joined: Sun Jul 06, 2003 4:02 pm
Location: WA

Post by Zac Zec »

measure the circumfrence and divide it by pie and you will get a accurate diameter measurement.

divide it by 25.4 for inches.
my 2cents for what is worth (f#@@ all)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

theres a set of 35 bias claws 2 weeks old of road work.. basically NEW for $1200 on ebay... I've made him an offer.. they were $1500 last week...
User avatar
NIK
Posts: 974
Joined: Wed Aug 13, 2003 12:13 pm
Location: Newcastle

Post by NIK »

Ok I finally got to measure a set of brand new claws. 35s on 10" rims measured just over 34" so Ive put my order in :D
Nik
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

ChrisV wrote:I haven't measured mine but my 38.5 inch Baja Claws are a bit bigger than my 38.5 Super Swamper SX's when put side by side.

The Interco website says the OD of the super swampers are actually 38.5"
http://www.intercotire.com/site30.php

So I guess my 38.5 Claws are a bit bigger than 38.5"????

Hope this helps....
In general i think most of the MT range measure small but from experiance there are not many manufacturers that have a genuine size anyway.

But for referance my old 38.5 Claws measured approx 39.5" on a 15x10 rim.
Post Reply

Who is online

Users browsing this forum: No registered users and 126 guests