Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cracked axle, melted bearings

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

cracked axle, melted bearings

Post by seaeagle »

gday guys, any help here would be appricated, i have a 62series and broke the right rear axle in half, theres no bearings left and it got real farkin hot. ive pulled some of it down and hears what it looks like.

Image
Image
Image
the bearings look like they are fused to the stub.
ive tried to drill a hole into the axle to tap it to get it out with no success.
its got so hot, theres steel build up on axle and in the diff axle housing too.
Top
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

what do you want help with?? removing the axle??? if you have an arc welder, weld a rod onto the end of the axle and pull it out with the rod when it's cooled down.

it's a bit dodgey but it works.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Looks like your wheelbearing colapsed and you kept driving till the axle welded itself inside the housing and the end snapped off. Must have been making a huge amount of noise?

Your going to have to total that housing and cut the axle out to save the diff centre.
Top
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Post by badger »

id be guessing the stub one the housing would be too rooted to reuse anyways if the bearings have failed that badly.

surely ud notice before it gets that bad
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

i noticed a jump/hop when taking off...no bearing noise, as put up in another post was put down to clutch shudder. even took it to a shop who drove it and said yep clutch.

when i take off the brake drum is the bit that is still sticking out, is it part off the diff or brake setup...( the bit in 2nd pic with bearing case on it)

i belive the diff centre will be saveable but not sure if the diff housing will be any good, i was hoping that there might be any easy way out , but i quess its not gunna be
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

The bit with the remaining bearing parts welded to it in that pic is called the stub axle. And im sorry but it is attached the the housing and does not unbolt. Its welded to it.
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

damn, anyone got a diff?
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

ive repaired a shit load of these here in the west, not a real big job if ya have all the gear, we used to cut the weld in a lathe and bash the stub out they come out pretty easy, we had lots of stubs lyin around to make things a bit easier.
buggy time............
Top
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

seaeagle wrote:damn, anyone got a diff?
Yep
I've got a spare housing with axles that i brought to steel the brakes off
i'm down lang lang way pm me your number and we can work something out
[quote="RN"]So do you support your local vendor...not if it is going to cost me almost double. [quote]
Top
Posts: 238
Joined: Sun May 07, 2006 7:37 pm
Location: Pakenham

Post by seaeagle »

pm sent....
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

http://cgi.ebay.com.au/Toyota-Landcruis ... dZViewItem
Confucious say...man who argue with idiot, worserer himself
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest