Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Changing.replacing tire valves

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Changing.replacing tire valves

Post by zagan »

Got a speedy seal kit and ithas the 4 valves.

just wondering how you change a valve on a tire.
Top
Posts: 1423
Joined: Thu May 26, 2005 7:00 pm
Location: Central Coast, NSW

valve

Post by klrevo »

screw the old one out, screw a new one in. use the little 4 way tool in the kit.

dean ;)
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

are youmeaning thelittle thing inside, I meant the whole stem.
Top
Posts: 722
Joined: Fri Sep 29, 2006 7:40 pm
Location: QLD

Post by zagan »

are you mean the little thing inside, I meant the whole stem.
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

If its the whole stem, take off the valve cap, spit on the bulb at the bottom of the rubber part of the stem, poke it through the rim hole from inside, screw the outside thread cutter of the 4 way tool onto where the valve cap goes, lever the stem into place by using 2 screwdrivers/ tyre levers. Give it a wiggle around to make sure its seated correctly.
Mud makes excellent toothpaste.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests