Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Plasma rope

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Plasma rope

Post by Jimbo »

I winched an 8 tonne truck today out of some mud just behind my house and realised that my cable is completely stuffed....heaps of bad kinks and so on.

Anyway now that the aussie $$ is doing so well i'm guessing that plasma rope should be fairly cheap. Anyone know of a reliable place in the states to buy from? I'm looking at around 30m and my mate wants around 50m.

Cheers

James
GQII Patrol YAY!!
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Plasma rope

Post by bogged »

Jimbo wrote:I winched an 8 tonne truck today out of some mud just behind my house and realised that my cable is completely stuffed....heaps of bad kinks and so on.

Anyway now that the aussie $$ is doing so well i'm guessing that plasma rope should be fairly cheap. Anyone know of a reliable place in the states to buy from? I'm looking at around 30m and my mate wants around 50m.

Cheers

James
plenty of threads and a bulk buy on this recently...
Posts: 1245
Joined: Fri May 02, 2003 4:28 pm
Location: Kyrgyzstan

Post by me3@neuralfibre.com »

www.cseoffroad.com. was good for me.

Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Posts: 228
Joined: Sat Dec 11, 2004 9:36 am
Location: Latrobe Valley Victoria

Post by Troopy93 »

www.okoffroad.com ,back when the dollar wasn't so good i got 30 m 5/16 Amsteel Hunter Green rope and a Billet Hawse Fairlead shipped in 5 days for $299.03 aussie. Cheers Troopy93
93 1HZ Troopy Double Locked, Lifted and Gassed with NO Benefits by D-GAS

D-GAS= Dont - Give A Shit
Posts: 2
Joined: Wed Nov 15, 2006 10:02 pm
Location: Brisbane Southside

Re: Plasma rope

Post by Chaz »

Jimbo wrote:Anyway now that the aussie $$ is doing so well i'm guessing that plasma rope should be fairly cheap. Anyone know of a reliable place in the states to buy from? I'm looking at around 30m and my mate wants around 50m.

James
Aussie $ buys about 1.22 Un Zed dollars at the moment. I just got 15 metres Amsteel Blue (8mm) in my hands for AUS$84, internet order from a yacht supply mob (don't have stuff like winch fairleads). Visa and airmail across the Tasman. Almost like buying local, hey Bro!!! Just suggesting you look around and don't asume buying from USA is cheapest.

Chaz
Toyotas, Engels, and old dogs have never let me down.
Posts: 5
Joined: Fri Mar 21, 2008 6:09 am
Location: Brisbane

Plasama rope

Post by davidl »

I replaced mine with a rope from a rope supplier in brisbane. I paid almost 10 dollars a metre but if I had taken the 200 metre roll it would have been about $7.15 a metre for 10mm.
Posts: 131
Joined: Fri Nov 07, 2003 11:59 am
Location: Fraser Coast Qld

Post by Tailspin »

Aussie $ buys about 1.22 Un Zed dollars at the moment. I just got 15 metres Amsteel Blue (8mm) in my hands for AUS$84, internet order from a yacht supply mob (don't have stuff like winch fairleads). Visa and airmail across the Tasman. Almost like buying local, hey Bro!!! Just suggesting you look around and don't asume buying from USA is cheapest.

Chaz
I replaced mine with a rope from a rope supplier in brisbane. I paid almost 10 dollars a metre but if I had taken the 200 metre roll it would have been about $7.15 a metre for 10mm.
Any contact names or numbers then fellas??
Fraser Island tour bus drivers suck!!

www.waterfrontrestaurant.info
www.frasercoast4wdclub.com
www.coastal4x4.com.au
1988 GQ 4.2TD, 2002 GU 3.0TD Wagon, 1987 HJ75 Ute.
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Yeah contact for that NZ bloke would be good.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Re: Plasma rope

Post by MissDrew »

Jimbo wrote: my cable is completely stuffed....heaps of bad kinks and so on.
Try running it through a winch block before replacing it.
As long as the kinks etc go through the block while under some load they will straighten out like new again.
If the kinks are on the drum side of the half way point on the cable then just set up a triple line pull.

As long as the cable doesn`t have heeps of frayed strands it will be fine.

WAY cheaper then replacing it.

My winch is now 9 years old and has done heeps of work, it still has the original cable on it and its near perfect. Have looked at it a few times and thought mmmm time for a new one. But once I`ve done the good old winch block trick it just comes up like new again.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests