Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RRC rear bar pics please?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

RRC rear bar pics please?

Post by ... rick »

Been contemplating a design for rear car on my rangie that will protect the rear quaters. Does anyone have any pics of some that dont look so 1980's?
rick@offroadmediagroup.com.au
Top
Posts: 139
Joined: Mon Dec 05, 2005 6:06 pm
Location: Eastern Melbourne

Post by awright »

While we are at it..

Can we add to it with Rear Disco Bars as well... I need some ideas before I start on yet anothe project. :)
Take me to the Bush!
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

how can you go past what boggerbrad did? That is very impressive work!
Warn - Dont leave home without it
Top
Posts: 1985
Joined: Wed Sep 22, 2004 11:00 am
Location: NSW

Post by ... rick »

TRobbo wrote:how can you go past what boggerbrad did? That is very impressive work!
On my moniter it is very hard to see it clearly, it is all so dark with no definition. Maybe BB can get some clearer pics for a noob like me :lol: ?

Cheers.
rick@offroadmediagroup.com.au
Top
Posts: 400
Joined: Thu Jun 24, 2004 8:56 pm
Location: Wakerley, Brisbane

Post by 86MUD »

HeyRick

I have an ARB bar that I have modified to suit a 2" body lift. I am tossing up on whether to make a bar like boggerbrad or modify the current bar. The current bar is very solid (and heavy) but is a strong point for towing/recovery

If I do modify the current bar I plan on trimming the "ears" from each corner, trim the lower quarter panels and weld in some 50 x 50 rhs to protect the side panels, I also need to change the swing arm mount as the current mount is not happy with 33 x 12.5 tyres - the spare tyre vibrates at 100kms

Here is a pic from a while ago...I am now running bigger tyres.

Image

Cheers

Andrew
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

....and see...


http://www.outerlimits4x4.com/viewtopic ... highlight=
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Post by V8 Rangie »

This is the bar I had made.rear panels were cut...very happy with it.

Image
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Top
Posts: 6
Joined: Tue Jun 12, 2007 4:49 pm
Location: yarra valley

Post by LUKASS »

Great looking rear bar V8 Rangie.... but my interest is in your flared guards where did you get them?
Top
Posts: 400
Joined: Thu Jun 24, 2004 8:56 pm
Location: Wakerley, Brisbane

Post by 86MUD »

Hey Cam

How is your swing away attached to the bar? What kind of pivot mechanism are you using?

Cheers

Andrew
Top
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Post by V8 Rangie »

Front flares are reversed from a D3 (left on right, right on left)

and rear flares are custom.. only bugger is the rear ones are impossible to replace.. prolly go flexi flares down the track.

The rear swing away now has a large bearing pivot on it now.. that original one had too much play.

Cheers

Cam
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Top
Posts: 2691
Joined: Sun Sep 03, 2006 7:31 pm
Location: where ever the track takes me

Post by muddydigger »

86MUD wrote:HeyRick

I have an ARB bar that I have modified to suit a 2" body lift. I am tossing up on whether to make a bar like boggerbrad or modify the current bar. The current bar is very solid (and heavy) but is a strong point for towing/recovery

If I do modify the current bar I plan on trimming the "ears" from each corner, trim the lower quarter panels and weld in some 50 x 50 rhs to protect the side panels, I also need to change the swing arm mount as the current mount is not happy with 33 x 12.5 tyres - the spare tyre vibrates at 100kms

Here is a pic from a while ago...I am now running bigger tyres.

Image

Cheers

Andrew
Every time I see this rangie, i thinks so cool, it s nice rig mate!
For Kart racing information please visit our site at www.auskart.net
Top
Posts: 181
Joined: Sun Aug 22, 2004 4:37 pm
Location: melbourne

Contact:
Contact swamp

Post by swamp »

what about theseImage
Image[img]http://i279Image.photobucket.comImage/albums/kk148/mojof/rangie002.jpg[/IMG]
out of my mind, back soon.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 46 guests