Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Calmini suspension lean

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Calmini suspension lean

Post by scooby_74 »

95 !.6 lwb vitara , what would be a normal suspension lean for the calmini suspension?
Ive noticed that they all lean to the right to a point.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

its more to do with the engine torquing, fuel tank, driver, battery etc all being on that side of the zuk... its more common in sierras than vitaras but generally its because of that extra weight and the manufacturers dont account for it - or in calmini's case the driver is usually on the other side so it prolly balances out =)
The worst thing about censorship is ███████.
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

What lean? Mine has always been within a few mm either side on a 1.6 lwb, 1.6 swb and 2.0 swb although the 2.0 swb is running different front springs. The Calmini front springs are not that great and can sag so maybe yours has sagged on one side only.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I can vouch that Cj's eleventy builds with calmini suspension all sit level.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Post by suzukiboy »

After I fitted the Calmini lift to mine it had a lean to the right, used to annoy me no end.
So I fitted a 1 1/2" spring spacer to the right rear to balance it out.
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Posts: 176
Joined: Tue Dec 11, 2007 10:10 pm
Location: Perth

Post by scooby_74 »

This one has 15mm lean to right, was thinking of a 10mm spacer under the right rear coil.
That and or swaping rear coils left to right.
93 NJ,5 speed,2" body lift,32" muddies

There's nuttn like momentum
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Post by suzukiboy »

scooby_74 wrote:This one has 15mm lean to right, was thinking of a 10mm spacer under the right rear coil.
That and or swaping rear coils left to right.
Tried swaping springs still had the same lean.

Go a spring spacer, there is a guy in the England that sells them, much better design then I have seen over here.

See if I can find this ebay pages.
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Posts: 269
Joined: Thu May 06, 2004 2:51 pm
Location: Brisbane, Southside

Post by suzukiboy »

Also my spring spacer is on the top.

scooby_74 too bad you are not in Brisbane, because I was going to buy a set off him I know someone else that only wants one as well.

Here is the link the the spacers.

I now see he sells them in a set of two or four, good to have a spare, not that mine has failed yet.

http://cgi.ebay.co.uk/Suzuki-Vitara-Gra ... dZViewItem
Suzuki Vitara JX 1.6 EFI Hardtop.
Calmini Lift, Rockhopper, Skid Plates, ARB Airlocker, Bullbar, 30" MTR, Custom Sill Sliders, Rear Bar.
See my pics
http://community.webshots.com/user/suzukiboyoz
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

Not a vitara I know but my sierra with calmini lift leans, as mentioned I think it has more to do with weight. I put the spare on the passenger side to help combat it and I plan to do some more weight shifting soon.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest