hi guys . on installing lockers have picked one of my rear axles is twisted. Just after some advice on if the only option is to go genuine nissan or if there is after market ones available.If so what is recomended. also only one axle is twisted . Should i put two new ones in while it is all apart?
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
twisted axle gq
Not really....can have a custom shafts cut. Not a big deal if shop has the equipment. But expensive.ozy1 wrote:ive twisted a couple of rear axles so far, and at the moment your only option is to buy second hand ones,
or genuine if you can afford that,
there is talk of Cromolly rears but they will be along way off yet,
if it were me id replace the twisted one and keep driving it
www.rmp-o.com
i do know you can get custom axles turned, i should have mentioned for the cost, i personally will run factory until there is a produced bolt in alternative, as cost is a factor for myselfmRMP&O wrote:Not really....can have a custom shafts cut. Not a big deal if shop has the equipment. But expensive.ozy1 wrote:ive twisted a couple of rear axles so far, and at the moment your only option is to buy second hand ones,
or genuine if you can afford that,
there is talk of Cromolly rears but they will be along way off yet,
if it were me id replace the twisted one and keep driving it
i have tried hi-tuff axles but no luck ,they snapped ,we could of tried others but to hard to test. we think the up and down flexing was the cause . any contact details on the other types of after market stronger axles ? running GU rear diff.
thanks to~ ON & OFFROAD MECHANICAL , F.A.T BARS , ARB COOPERS PLAINS , WM MOTORSPORT , 2DEXTREME , DIRECT CLUTCHES & FOURBY`S
Who is online
Users browsing this forum: No registered users and 13 guests