I am swapping some air con bits between cars... bit of a long story but basically I have an R12 system in pieces that I can clean up any way I like before I put them back in.
To make it easy when it comes time to regas it later, what sort of cleaning job should I do, if any? I think I read that there are newer oils these days that mean that it isn't as critical to clean all the old R12 out as it used to be.
Anyone know?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cleaning out R12
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Cleaning out R12
This is not legal advice.
it's his job.
to make it easier when it comes time to regas it later on you should seal the ends of all pipes and fittings. This will prevent any dirt, wasps nests etc getting into anything. Leave the rest to the experts. They can change the oil in the compressor and flush the system once it is assembled and ready for regas. There is not much point flushing it untill it's all together.
Who is online
Users browsing this forum: No registered users and 2 guests