Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
quick question zook transfer
quick question zook transfer
hey, been searching but cant find the thread im after so,
will a wt transfer (92) bolt straight into a 86 nt?
any difference in the gearing?
will a wt transfer (92) bolt straight into a 86 nt?
any difference in the gearing?
Just swap the flanges. You will need to make a bar to stop the flange spinning - just a star picket or some scrap with a couple of holes in it, and a rattle gun.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
oh ok happy days, can rebuild my old one, and no down time! ...
threw it in today, had to swap jackshaft and front tailshaft flanges.
the oil in the old one looked like thick mettalic paint with chunks of gear in it.
the new one came complete with golden oil hehe tightarse
car drives alot better, alot less sloppy, what a difference.
thanks for help guys
nic
pic from last week
threw it in today, had to swap jackshaft and front tailshaft flanges.
the oil in the old one looked like thick mettalic paint with chunks of gear in it.
the new one came complete with golden oil hehe tightarse
car drives alot better, alot less sloppy, what a difference.
thanks for help guys
nic
pic from last week
Who is online
Users browsing this forum: No registered users and 0 guests