G'day,
I have a coolant leak in a lwb Vitara G16B, it uses a large amount of coolant in a single day, i have to add a fair amount of coolant each morning. I have pulled the cap off and cant see any bubbles in the coolant.
When the engine is running and lying under the vehicle you can see engine coolant dripping off the front diff. When looking from above you can see it dripping onto the alternator, then the water pump then onto the diff.
Can anyone direct my search as to where the leak may be?
Are the heads and blocks prone to cracking?
Cheers,
Sean
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ENgine coolant leak
ENgine coolant leak
[quote="v840"]fat chicks actually [i]do[/i] give better head cause they're always hungry![/quote]
Hopefully more simple and cheaper to fix than head or block. Unsure if that's common but have found G13 blocks handle plenty of abuse.
Check rad/heater hoses for pinhole sized leaks first. They will spray from the split hose and onto something else in the bay. I thought I'd split a head gasket a few years back as coolant appeared to be leaking from the block, but like you, no bubbles or oil in the coolant etc, but then realised a heater hose was split and spraying onto it.
Check rad/heater hoses for pinhole sized leaks first. They will spray from the split hose and onto something else in the bay. I thought I'd split a head gasket a few years back as coolant appeared to be leaking from the block, but like you, no bubbles or oil in the coolant etc, but then realised a heater hose was split and spraying onto it.
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Had the same problem with mine 2 weeks ago. Replaced the two heater hoses then found the culprit was a small hose from the throttle body to the block above the alternator. It was at the throttle end but was running down on to the bottom heater hose. Access was tight I’d recommend taking off the black plastic cover near the efi print 3 bolts. From the side/under take off the triangular black mount 2 high bolts and loosen the bottom and swing out. The hose had a few bends in it but after a small search at repco they found something close off a landcrusier $10
Who is online
Users browsing this forum: No registered users and 63 guests