Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ racing seats?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 202
Joined: Wed Oct 27, 2004 12:22 am
Location: perth lesmurdie

GQ racing seats?

Post by JEEP1 »

guys im just wanting to know what u guys think are the better racing seats and harneses to get for a GQ?

do they have to be 4 point, 6 point?? for most comps??

thanks
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

well i ahve never had harnesses, but need them soon, and i am goin 4 point and 3'' wide. This is because i dont want that 5th point crushing ur balls when goin down hills or when u roll etc. And 3'' wide instead of 2'' so its spread across ur shoulders smore, so it doesnt cut into your body as much.
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

yeah I'm running Monza seats and Simpson 5 point harnesses ( fifth point not fitted for now ) Mine are also 3" wide to spread the load as mentioned.

The only thing i have found with the monza is that they are a tight fit width wise into the GQ and down the track will be looking at may be replacing.
www.mudrhino.com.au
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

this is the seat i have, and i have big shoulders and it took forever to find the right sized seats, seem to fit in these well:

http://bbmotorsports.com.au/prod381.htm
Posts: 202
Joined: Wed Oct 27, 2004 12:22 am
Location: perth lesmurdie

Post by JEEP1 »

yeh maccas they look like the go thanks for ya help
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

except i got one for $150 off ebay, brand new, instead of the 300 from BBM.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

maccasMQ wrote:except i got one for $150 off ebay, brand new, instead of the 300 from BBM.
they look like they would be harsh, eg not much padding?
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

havent got them in the car yet, but dont seem too bad.
Posts: 256
Joined: Thu Jul 08, 2004 9:16 am
Location: Melbourne

Post by Ossie »

bogged wrote:
maccasMQ wrote:except i got one for $150 off ebay, brand new, instead of the 300 from BBM.
they look like they would be harsh, eg not much padding?
Steph and I use a similar seat (see link)

http://www.racetech.co.nz/products.php? ... SPRINT.htm

Though these were not $150 ea.... they are FIA/CAMS approved.

In events like the OBC in 3hr nav stages and rough ground they are fantastis. They hold you in and allow you to drive, rather than trying to stay still on normal seats.

The only disadvantage is for Steph having shorter legs, when doing Short stages ie Ateco with a winch, they are not as easy to get in and out of quickly.

Jaosn
TIGGR6 - Got the plates but not the car...
Posts: 93
Joined: Fri Mar 07, 2008 10:52 pm
Location: Boronia,Vic

Post by hjgq »

I brought a monza for $100 for a guy on a nother forum and Cheezy,s fitting in in a week for $150 cann't wait!!!

was going to do both front seats but the navi/missus hates race seats "there to harsh and they hurt my butt"
Post Reply

Who is online

Users browsing this forum: No registered users and 45 guests