Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

IZF-FE engine oil anf filter

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 308
Joined: Wed Feb 11, 2004 4:51 pm
Location: Adelaide, South Australia

IZF-FE engine oil anf filter

Post by slowLux »

tried search but nothing came up, wanna service my 80, what oil and filter should i use? also, any other handy hints or anything to do with servicing

cheers,
80 GXL
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

I did the first service on my 80 the other week and found the oil filter was so tight I had to drive a bar through it to be able to turn it. Also the g/box drain plug is on the drivers side, not on the bottom which is where I went looking for it.
I used a fleetguard LF3487 and AF4509 because I get them cheap through work and Caltex Havoline Premium (engine), Easyshift75w90 (g/box& x-fer), we have all these at work and were what the caltex web site recommended.
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

z9 ford filter and 7 litres of 20/50 gtx or similar
Confucious say...man who argue with idiot, worserer himself
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

I now use the Z9 filter that dow50r put me onto and 7L of Caltex GTX3 comes in 5.5L bottles at supercheap for the price of 5L that repco sell it for
2001 100 series stock as a rock
Posts: 308
Joined: Wed Feb 11, 2004 4:51 pm
Location: Adelaide, South Australia

Post by slowLux »

thats a z9 ryvo filter? thatught they didnt work well on 80's?

cheers
80 GXL
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

I once owned a 1fz. It would timing chain rattle on startup. Toyotas fix is to install a small filter....the z9 is equivalemt to the std sized toyota filter.
I had my injecters cleaned for an unrelated reason, and the rattle on startup disappeared, revs when cold slowed too...
If you want to run good oil, try castrol edge synthetic 5w50, on special at supercheap this week for $39/5 litres....you can keep it in the motor longer, and therefore use less filters.
Andrew
Confucious say...man who argue with idiot, worserer himself
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests