Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

45's chassis

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 23
Joined: Sun Jul 25, 2004 3:26 pm
Location: Thursday island

45's chassis

Post by 96hilux »

Is there any difference between an hj and fj 45 chassis?
Posts: 8
Joined: Thu Jan 24, 2008 10:45 am
Location: the better side of melbourne

Post by ronno »

nope there all the same even some 75 series chassis are no different apart from cab mounts
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Post by Ricko »

Wouldn't the spring eye size be different between earlier and later models?
Posts: 49
Joined: Fri Sep 12, 2008 8:06 pm
Location: nth brissy

Post by gustute »

both make good boat anchors :roll:
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Ricko wrote:Wouldn't the spring eye size be different between earlier and later models?
Probably but its not a big deal to swap the hangers.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Re: 45's chassis

Post by jessie928 »

96hilux wrote:Is there any difference between an hj and fj 45 chassis?
hangers are different
crossmember's are different...
mounts are different.
but you can " interchange" them with some mods.

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

the hangars are not differant between FJ and HJ 45/47 series. They are exactly the same. The differant size hangar is dependant on the year, not the engine type. Up until 1980 (i think) they all used small diameter spring hangers. After that they all used large diameter spring hangers.
Posts: 23
Joined: Sun Jul 25, 2004 3:26 pm
Location: Thursday island

Post by 96hilux »

Thanks Guys
I have a hj45 with a rusty chassis and have only been able to find fj chassis thinking the tray and body mounts would be the same, just more worried about the motor and gearbox mounts, would thay be that hard to change if thay are different?
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

96hilux wrote:Thanks Guys
I have a hj45 with a rusty chassis and have only been able to find fj chassis thinking the tray and body mounts would be the same, just more worried about the motor and gearbox mounts, would thay be that hard to change if thay are different?
just finished putting a petrol motor in a hJ chassis.

motor mounts are fine, use your rubber mounts from your chassis, and you'll be sweet.

the drivers side gearbox mount is the biggest issue. but all it takes is cutting off the petrol mount, and drilling holes to suit the mount (unboltable on the HJ45 chassis) off yours. passenger side, they both sit on the chassis,so just use the rubber mounts off of your chassis...

another consideration is be prepared to rework the fuel lines, as the 2f and the H have er... slightly different setups
Spit my last breath
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

gustute wrote:both make good boat anchors :roll:
I put one on the front of my tinny and it has now sunk in the Pine River, your advice cost me a boat :cry:
hands and mums dont count!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests