Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Indicator Problem

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 13
Joined: Tue Jun 10, 2008 8:24 pm
Location: Brisbane

Indicator Problem

Post by zooklover »

Just this weekend i went for a trip to Mt Mee in the suzi and hit up some trails, now my indicators dont work. Any ideas what has happened? Its a bit embarassing having to indicate with hand signals.
Posts: 92
Joined: Tue May 02, 2006 9:25 pm
Location: melbourne

Post by robsjimny »

Check the Flasher Can. Hazards wont work also.
http://vic.suzuki4wd.com/forum/index.php
www.jimny.se
Posts: 13
Joined: Tue Jun 10, 2008 8:24 pm
Location: Brisbane

Post by zooklover »

my hazards do work though, i dont think it is the flasher can.
Posts: 18
Joined: Fri Jun 20, 2008 12:57 pm
Location: Tassie

Post by KoniX »

do sierras have some sort of diagnostic thing, because when my fuse failed for the dash lights and tailight every time u press brake pedal down or turn lights on the high beam light would light up..i got snatched out of a hole the other night and now my tailights and indicators dont work, the front indicators stay on and when i turn lights on or press brake pdeal my indicator lights come on buuut i cant see any fuses broken :( sorry for rant :( but its annoying on a daily driver
Posts: 43
Joined: Wed Apr 16, 2008 9:29 pm
Location: Tassie

Post by Mike E »

its the dodgy suzuki wiring mine did the whole press the brake and the the indcator goes on but i took tali lights apart cleaned them then i noticed the wire going to the plug for the trailer lights had pulled out so i seperated the wires and now they work fine
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

zooklover wrote:my hazards do work though, i dont think it is the flasher can.
Cant remember with zooks, too late to check
But some cars have separate flasher cans for Hazards and indicators
Often the same with fuses too

Check that the plug from the steering column has not come loose, completely disconnect it and look for corrosion of the terminals

Cant find my wiring diagram ATM but work out which wires are for the indicator. There should be three (feed, Left and right)
Using a multimeter or test light see if the 12V between feed and ground
Using a piece of wire at the plug short from feed to left the feed to right
If they work your stalk is buggered (misses won't be impressed)
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Posts: 13
Joined: Tue Jun 10, 2008 8:24 pm
Location: Brisbane

Post by zooklover »

Just gave the suzi a really good clean with the hose and the indicators now work, i have no clue why, but im happy :lol:
Posts: 18
Joined: Fri Jun 20, 2008 12:57 pm
Location: Tassie

Post by KoniX »

well i checked my flasher can and it was perfect then used a test light and found tha the gorund had broken off..so now mines working all good again :)
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

Many of the stupid little electrical/lighting problems on zook can be solved by cleaning the earths and lights out. Goes for many cars actually.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 65 guests