Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tube front bars

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11
Joined: Wed Aug 27, 2008 7:16 pm
Location: tamborine

tube front bars

Post by zookster66 »

hey lookin at making a bullbar out of tube, does anyone have any pics for some ideas. and mounting set ups. cheers
Top
Posts: 31
Joined: Thu Sep 06, 2007 10:22 pm
Location: North Richmond

Tube bar

Post by Zooknut »

Image
Image

These pics are from my old coily. The bar was from a leaf sprung, I removed the third (rear cross tube) from the bar to save weight and clear my aircon assembly I also welded up the ends with plate. When I bought it the guy told me it was made by overkill. I have since sold the car so I can't help with any measurements but PM me if you want to know more and I will be only to happy to help. Regards, Stirlo.
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

see link to 'The UFO' below for mine. Its hiding the chassis extension.
The worst thing about censorship is ███████.
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

Image
sorry couldnt figure out how to make it smaller
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

Here is a pic of mine built by 80LSY. Brackets were made with 8mm plate that were cut to fit around the tube xmember. New lights are still to be mounted, don't like the originals just zip tied there and some bracing around recovery mounts.
Image
Image
Image
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

Image
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

Image
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

basketcase - have you impacted anything with yours yet? looks like it'd rip right through the 3mm chassis rail... better to put crush tube in the rail and bolt all the way through it...
The worst thing about censorship is ███████.
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

i had mine the same as baskets
was ok until my farkwit mat snatched me at about 6000rpm and ripped the bar bolts through the ends of the rail
now i have 60mm chassis extension with 4 bolts per side running right through both side of the rail with crush tubes welded in.
now the body will separate from the chassis before the bar does :twisted:
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 8
Joined: Sat Sep 16, 2006 8:15 am
Location: Limbri NSW / Broome WA

Post by springcart »

this bar works extremly well for protection. hits first at all angles, and
carries a high mount winch, number plate slots in the two holes above fairlead.

Image

Image
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

alien wrote:basketcase - have you impacted anything with yours yet? looks like it'd rip right through the 3mm chassis rail... better to put crush tube in the rail and bolt all the way through it...
Was thinking about crush tubes, but got to find a bolt or nut that will sit inside that bit below the body mount, mabye allen key type??. But have seen a few other done like mine and had no problem.
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

grind the side of the bolt of so it fits in
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

skez wrote:grind the side of the bolt of so it fits in
I would prefer not to do sh*t like that. Would almost have to grind the head down to the size of the bolt.
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Don't grind the head off the bolt. Use a longer bolt with two crush tubes. One inside the chassis rail and one outside it, inside the perch outrigger.
Image

Jas.
EDIT: Added the red bits to highlight the 3 crush tubes each side.
Last edited by want33s on Mon Oct 27, 2008 6:39 pm, edited 1 time in total.
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

basketcase wrote:
skez wrote:grind the side of the bolt of so it fits in
I would prefer not to do sh*t like that. Would almost have to grind the head down to the size of the bolt.
dont see the problem with it looks alot better than the one above
Top
Posts: 169
Joined: Mon Jul 14, 2008 4:20 pm
Location: CQ, Aus

Post by Zook_Fan »

but there is a big difference between looks and whether or not you damage your chassis.... i know which i would prefer....
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

how will it damage your chassis
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

idont think u no wat im talking about i will get a photo and show yas ok
Top
Posts: 298
Joined: Tue Mar 20, 2007 5:17 pm
Location: Mackay QLD

Post by skez »

Image
Image
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

Image

Image
Image
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

That's hot ^^^
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Top
Posts: 51
Joined: Fri Aug 29, 2008 2:38 am
Location: perth

Post by hooki »

thats a bloody nice bar '84ZOOKSTA'. How did you attach it to the chassis though?
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

^^^that is exactly what i thinking of, tube with the front plate to cover the winch. very nice.

any pics of the connections to the chassie?
4age zook ute in lots of bits
Top
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

It is attached to the chassis rails using the factory holes and crush tubes, i also have 3mm plate welded to the chassis and the bar also bolted to that. i will take some photos soon.

The winch is actually mounted in a FULL winch cradle. it was laser cut, folded and welded and is made out of 5mm steel, the photo attached shows a view from underneath.
Image
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests