Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

patrol rear bar with gaurd chop

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

patrol rear bar with gaurd chop

Post by ssfabricator »

hi im looking for some photos and ideas on making a rear bar i have hayman reese towbar and want to keep it but get it high as possible
and yes i have searched and most photos have been moved or deleted
If i just overtook you head to your nearest mechanic
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

im looking into doing this aswell so any pics would be great
cheers
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

Cheezy does a really nice one. No pics or pricing on his site which is a bugger. Gueey has one and it looks trick. (Checkout the bible) Would love to know how much of the rear needs to be cut to fit it.
GU Patrol with go better bits added
Posts: 93
Joined: Fri Mar 07, 2008 10:52 pm
Location: Boronia,Vic

Post by hjgq »

I've done mine my self not hard at all look up www.mudrhino.com.au and look at the D.I.Y section heaps of good stuff I did my chop and bar for about $300 - $400 for both and if I knew how to up load pic I would do it as well
Posts: 89
Joined: Sat Dec 10, 2005 10:26 pm
Location: North Qld

Post by jcclures »

I did my rear quarter panels and rear bar as well, it probably is not what you want but you can have a look and see if there is anything that will help you do yours.
http://www.4wdmonthly.com.au/forum/show ... 736&page=3
1986 Nissan MK Deluxe, 1uzfe quad cam V8, Bull bar, Thomas Winch
Super Oscar Spotlights, Sliders with Body lift, And Long-range Fuel Tanks.
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Post by ssfabricator »

done the qauters today pretty much went off what mud rhino did just went a little higher i have some pics but it was dark when i finished going to make rear bar with twin tyre holders next weekend
[img][img]http://i270.photobucket.com/albums/jj93 ... C00152.jpg[/img][/img]
If i just overtook you head to your nearest mechanic
Posts: 4607
Joined: Sun Oct 22, 2006 8:11 pm
Location: yallourn north,victoria

Post by tna racing »

Image
Image
Image
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
Posts: 63
Joined: Thu Aug 28, 2008 8:44 pm
Location: Gold Coast

Post by mat_p »

here is one off the mudrhino forums, which i am going to attempt to replicate once i have done a body lift and a 1/4 guard chop.
i just need to work out what was done with the towbar...as in wether or not the bar is welded to the side of it or if the part that holds the towball is welded to the top of the bar.
i was actually thinking of flipping my whole towbar over so it mount on top of the chassis and welding the extra bite on the outside of it, which is what it sort of looks like has happened here...but im not to sure.

Image

Image
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

hjgq wrote:I've done mine my self not hard at all look up www.mudrhino.com.au and look at the D.I.Y section heaps of good stuff I did my chop and bar for about $300 - $400 for both and if I knew how to up load pic I would do it as well
Anyone that uses that mudrhino process will end up with heaps of RUST!
Silcone+metal=RUST

Use urathrane!
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

I did mine similar to Mat_p. I used the haymen reece towbar. I cut the ends of, so I could mount them on the otherside so they went down instead of up.
I had to drill some extra holes in the chassi to get all the bolts in.
THen I welded 75x75 so it went to the cnrs, this is the same as the towbar.
Then used 50x75 or similar to go forwards to teh wheel arch.

I didnt taper mine on the cnrs though. As I found the bar tends to dig into the mud. So I wanted it to stick out slightly. Worked much better than the flush mount setup. It also made for a nice spot to put in twin pivots.
THOUGHT FOR THE DAY....
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

SIM79 wrote:
hjgq wrote:I've done mine my self not hard at all look up www.mudrhino.com.au and look at the D.I.Y section heaps of good stuff I did my chop and bar for about $300 - $400 for both and if I knew how to up load pic I would do it as well
Anyone that uses that mudrhino process will end up with heaps of RUST!
Silcone+metal=RUST

Use urathrane!
Natural cure should be fine, acid cure could cause issues. Either way silicon is shit to paint, better off using Everflex 240-PU by Adheseal.
Posts: 93
Joined: Fri Mar 07, 2008 10:52 pm
Location: Boronia,Vic

Post by hjgq »

nastytroll wrote:
SIM79 wrote:
hjgq wrote:I've done mine my self not hard at all look up www.mudrhino.com.au and look at the D.I.Y section heaps of good stuff I did my chop and bar for about $300 - $400 for both and if I knew how to up load pic I would do it as well
Anyone that uses that mudrhino process will end up with heaps of RUST!
Silcone+metal=RUST

Use urathrane!
Natural cure should be fine, acid cure could cause issues. Either way silicon is shit to paint, better off using Everflex 240-PU by Adheseal.
I agree with the silicon coment thats why I didn't use it at all just painted every thing first then when atached then bogged,sanded,bogged and painted about 5 coats outside and spray inside as well
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

would sikaflex work okay to seal the new panel to the body and then bog outside to shape it.
Satnav with Teretts, now thats funny....
Posts: 404
Joined: Sat Feb 24, 2007 8:52 pm
Location: hunter nsw

Post by ssfabricator »

i used sikaflex and i can get easy access to inside and fishoil i like the idea of the towbar above chassis rails but im not a fan of body lift workin on rear bar tomorrow
If i just overtook you head to your nearest mechanic
Posts: 89
Joined: Sat Dec 10, 2005 10:26 pm
Location: North Qld

Post by jcclures »

Rust is why I did mine the way I did, I was able to just spot-weld the seams the same as the factory method, plus used drain slots in the panel. Then sprayed plenty of rust proofing on the inside.
1986 Nissan MK Deluxe, 1uzfe quad cam V8, Bull bar, Thomas Winch
Super Oscar Spotlights, Sliders with Body lift, And Long-range Fuel Tanks.
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

after u have done the chop and all the welding and prep work, apply seam sealant to all the joins, its rubber based and is the best to seal up the pannels, plus dosent promote rust..
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

has anyone got some pics of their guard chop. I am going to do mine in the next few weeks and would appreciate some before/during/after pics to give me some idea's AND is there anything to watch out for while the grinder is at full boar :roll:
Satnav with Teretts, now thats funny....
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Post by SIM79 »

Found these doing a search!!!!!!
Image

Image[/img]
Posts: 55
Joined: Mon Aug 01, 2005 7:30 pm
Location: southern highlands

Post by not stock »

All rear bars are very similar try and incorperate some recovery points if you can. I made mine out of 10mm plate as strong as they come.

Image

Image
2000 GU Patrol TD42T 4in Flexi 7in procomp Allied Savanna's 35 KM'2 Lockers Barwork Draws Bla Bla Bla......Hardcore tourer
2010 Honda CRF 450X
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

thanks not stock, can you pls post a pic of your front tube bar :D i know its off topic but your avatar has caught my eye :D
Satnav with Teretts, now thats funny....
Posts: 55
Joined: Mon Aug 01, 2005 7:30 pm
Location: southern highlands

Post by not stock »

Hope this helps , my approach angle could be better but this was my first tube bar.

Image

Image
2000 GU Patrol TD42T 4in Flexi 7in procomp Allied Savanna's 35 KM'2 Lockers Barwork Draws Bla Bla Bla......Hardcore tourer
2010 Honda CRF 450X
Posts: 182
Joined: Sun May 25, 2008 2:16 pm
Location: in the scrub

Post by dont_follow_me »

very nice first attempt. if you did it again, what would you change?

obviously you would change the lower part to improve approach angle, but what else? and what size pipe is that?

cheers
Satnav with Teretts, now thats funny....
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

SIM79 wrote:Found these doing a search!!!!!!
are you able to explain this.. "SEARCH" thing you talk of?
Posts: 55
Joined: Mon Aug 01, 2005 7:30 pm
Location: southern highlands

Post by not stock »

The pipe is 50mm nb 4mm wall. For the approach angle I change the possition of the winch (further in under the grill) . But I'm happy with the bar it's different strong and does what it was made for.
2000 GU Patrol TD42T 4in Flexi 7in procomp Allied Savanna's 35 KM'2 Lockers Barwork Draws Bla Bla Bla......Hardcore tourer
2010 Honda CRF 450X
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests