Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2 inch lift kit

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 5
Joined: Thu Sep 18, 2008 7:07 pm
Location: western australia

2 inch lift kit

Post by ulesys »

I need some feedback from you guys in regards to giving the ol feroza a helping hand to get up. I have been quoted $1300 for a 2 inch lift installed and wanted to get the feel if this was a competitive quote. Bearing in mind south west WA is not a haven of suspension options!
I have also a set of 16 inch rims and wondered what the would be the best size tyre to tread that fine line between gaining traction and losing power.
I have also been told that to lift that high will make the vehicle highly unstable, but there seems to far to many ferozas out there with a lift kit to say other wise

cheers
Posts: 136
Joined: Tue Nov 27, 2007 7:58 am
Location: Whangarei NZ

Re: 2 inch lift kit

Post by meece4x4 »

ulesys wrote:I need some feedback from you guys in regards to giving the ol feroza a helping hand to get up. I have been quoted $1300 for a 2 inch lift installed and wanted to get the feel if this was a competitive quote. Bearing in mind south west WA is not a haven of suspension options!
I have also a set of 16 inch rims and wondered what the would be the best size tyre to tread that fine line between gaining traction and losing power.
I have also been told that to lift that high will make the vehicle highly unstable, but there seems to far to many ferozas out there with a lift kit to say other wise

cheers
cant help you with the pricing sorry altho $1300 to my mind seems a little steep, is that a quote for a suspention lift or a body lift?? body lifts are easy to do and mine cost me less that $120 NZ however i did the lift myself so no labour costs. the suspention lift cost me about $30 and that was for welding rods to make up a new extenteded set of shackles and a couple of cans of WD40 to free up the Lock nuts on the torsion bar f$%# me if they arnt tight on these babys. oh and i reused my existing shocks as they where in good condition

personally and other will disagree no doubt but ive found the best size tyre for MY Fez is a 235x75x15 Mud grip type, the 75 comes in at around 29 1/4 inches .. doesnt suck the power out of the poor little motor, keeps the speedo "somewhat" accurate give me excellent traction in mud and because of my Fez's light weight (1300kg) excellent in sand .. the only letdown in soft sand is the lack of power from the motor and thats the main reason i dont run bigger diameter tyres. ive had 30's and 31's on mine (borrowed from mates Zooks etc) the 31's just sucks way too much power when running on the beach in 4wd high ... basically i had to run everywhere in 4wd Low while on the 31's ... both the 30's and 31's made a huge differance to fuel ecconomy IE Crap! with the 29's on it now my Fez consistantly returns around 10 k/l

a 2 inch lift does not make your vehicle highly unstable ....mine currently sits about 3 1/2 inches higher than factory (swapping the factory 27" tyres for 29" (1 1/2 inch gain) plus a 1 inch suspention lift and a 1 inch body lift = close to 4 inches higher) admititally i run offset rims off a zook that increase my wheel track by a good 60mm (just have to keep a close eye on wheel bearing doing that) ive found that the Mighty Fez seems quite stable just take it easy on the corners (as you should in ANY 4wd :) )
_________________
1988 LWB ,IFS, LSD, POS, PAJ, 31" M/T's on bling rims, Snorkel, 2" Lift ,new shocks ,XD9000 winch
Posts: 36
Joined: Wed Jul 16, 2008 10:08 pm
Location: Sydney

Post by Sandy »

Hi,

I have a 2 inch suspension lift on my feroza and it's one of the best things i've done! It does not make it unstable at all. It actually drives a lot better as the standard feroza suspension is not the best.

$1300 is a very good price but it seems a little too cheap and might not include everything you need.
As well as the rear leaves, you should also get torsion bars instead of simply winding yours, and new shocks all round.
Posts: 51
Joined: Thu May 01, 2008 6:28 pm
Location: Brisbane

Post by mrpham »

$1300 isn't too bad of a price, that price should include new leafs, 4 new shocks, bushes, wheel allignment etc...

2" bodylift done by a workshop will usually cost around $800 including labour. if you can do it yourself then $200 should cover it.
Posts: 146
Joined: Thu Jan 12, 2006 5:47 pm
Location: Slovenia

Post by nebivedu »

I have 5cm body lift kit, 6cm trailmaster lift kit and 235/75/15 tyres on alloy wheels. Wheels are moved to out by 5cm, so the fez is 10cm wider. In front there is a cheap chinese snorkel and mile marker M8000 winch. The back of the car is jumping, because it is to light, so i have allways 50 or 75kilos of tools in the back. but in the end, Fez is more stable than standard fez, and i could use a trail (ruts) of nissan patrol.

My need is LSD in front diff and 100% locker in back diff, but there are none for the fez. The only posible way is to swap the diffs from toyota hiace, which has the same ratio 1:5,285.
I do not need sex, the government fucks me every day!
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

nebivedu wrote:I have 5cm body lift kit, 6cm trailmaster lift kit and 235/75/15 tyres on alloy wheels.
All that lift and thats the biggest tires you run? :?

I agree that $1300 is a good price if its suspension lift and includes a decent set of shocks. But make sure you know what brand/model they are before you go ahead or they might just throw in the cheapest set they can find :lol:

When I was just starting out, I got quoted a ridiculous price for 2" body lift by a well known and loved 4x4 company off this board, so I won't bother mentioning who it was. But it was around the $1500 mark. I lol'd when I found out how much I could have been ripped off!

And I can't see 2" lift making even a feroza unstable.
60 + Turbo, 33"s :armsup:
Posts: 194
Joined: Sun May 11, 2008 12:30 am
Location: Manila, Philippines

Post by monmendoza »

A 2" body lift should be cheaper.
I did a 2.5" body lift on my feroza and 2" suspension lift
using extended shackles, plus a ball joint spacer in front
and slight twisting of the torsion bar. all in all 4". It is not unstable both in
the trail and in the highway.

Here are some pictures of the lifted Feroza.
Image

Image

Image

Image

Here is a picture of the ball joint spacer
Image

I did not spend more than $600 for the parts to lift the vehicle.
Posts: 146
Joined: Thu Jan 12, 2006 5:47 pm
Location: Slovenia

Post by nebivedu »

RockyF75 wrote:
nebivedu wrote:I have 5cm body lift kit, 6cm trailmaster lift kit and 235/75/15 tyres on alloy wheels.
All that lift and thats the biggest tires you run? :?
Nope, the biggest tyres was 31", but with 235/75/15 has more power and use less fuel. 1 litre of gasoline in our country costs 1 EUR. That is aprox. 1.86 Australian dollars. Full tank is 111AUD.

This photo is with 30"
Image

5cm body liftkit
Image

winch
Image

Image
I do not need sex, the government fucks me every day!
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests