Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux cab weight and swap info?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Hilux cab weight and swap info?

Post by mrRocky »

currently doing a cab swap on my 85 hilux with commo v6 and was wondering how heavy it is and if there are any tricks to doing it without damaging anything as cab is in good cond, and i wish to sell it complete, eventually.
ive lifted suzuki ute cabs off before and they are suprisingly heavy, 3 men cant do it, had to use a engine crane, so i imagine a hilux cab is heavier.
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

c'mon someone must have swaped a hilux cab over before,
i searched - got nothing
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

dual or single?

I lifted my dual cab bodywork off to do my engine swap- the tray is a 2 man lift easy.

the cabin, stripped out completely, was a very, very difficult 4 man lift/struggle- six would be easy.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

I lifted my 81 model single cab with 3 strong guys
( RN46's are super light though)

I have had them off several times i have found the best way is with an engine crane
I open the doors and put a matress through the cab on the ceiling and a heavy duty ratchet strap looped throughand tightend down with a D shacke on it
Then i remove the bonnet and run another ratchet strap to each of the corners of the front of the car near the head lights.
by tightening and loosening the front strap you can move the centre of gravity to get it to balance right and to get it to move to the desired angle

this way the cab can be lowered as slow as you like to clear things on the way down with out getting tired

thrashlux
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

cheers guys, not looking forward to doing this but has to be done.
cab is a single 85 model
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests