Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn highmount

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

warn highmount

Post by 75 cruser »

ive just purchsed a new highmount and the brake is not working when winching in underload, and stop the winch it just freespools back out, the brake componet on the side can be moved back and forth by hand ( im thinking this is not normal ) and just wondering whats wrong with it, and before every one says just take it back, i purchased the winch from the states when i had hoilday thier earlier this year,

thanks rob
come on move over and let the 75 through
Top
Posts: 130
Joined: Mon Oct 27, 2003 10:41 am
Location: Melbourne

Post by Kane »

Hi rob. there is normally a little bit of play in the brake but depends on how much. It might sound silly but are you feeding the cable out from the bottom of the winch because that is the direction it is supposed to go and the brake won't work if it is not. hope this helps. Cheers, Kane.
Top
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

Post by 75 cruser »

thanks kane, i had a message from wayne smith (Smithy jnr) and he had the same idea, the winch cable was on the right way, but the small leaver at the back of the brake, was out of tension, once it was all tensioned up it worked like a treat, once again, thanks wayne for the phone call

rob
come on move over and let the 75 through
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest