I'm trying to install an immobilizer into my 75 cruiser. It's a Rhino RES4601. Has anybody had anything to do with these??
I have connected it as per the instructions but even with it disarmed, the car won't start. There is a relay in the control unit which doesn't seem to be energizing. I can force the relay and the car starts but for some reason it isn't working how it should. I've double checked the wiring but I can't find anything wrong.
Any help would be good cause it's starting to make me go crazy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Immobilizer Trouble
Moderator: -Scott-
Have you checked your IGN ON source for the alarm isn't cutting out when you try to crank it?
Most IGN switches have two circuits for power when the IGN is "ON"- one will cut out when cranking (to reduce drain on the battery) and the other will stay live while cranking (it powers only the systems required for the engine to fire.)
Most IGN switches have two circuits for power when the IGN is "ON"- one will cut out when cranking (to reduce drain on the battery) and the other will stay live while cranking (it powers only the systems required for the engine to fire.)
David
Who is online
Users browsing this forum: No registered users and 10 guests