Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just wondering how much oil a 1.3ltr zuk uses with fine motor. Mines desperately needs re-build (has 210k on clock) and it uses around 1/4 of oil to half a tank of fuel usually.
My compression on motor is fine all cylinders around same (200), should i get full rebuild or just all gaskets seals ect.? Other factor is bearings would be disturbed once motor is apart so new ones should be put in.
are you sure you dont have a leak somewhere? check the seal around the tappet cover. if it is leaking from there, you can get a new one for about $15 bucks from repco.
yep its shagged.. but blows very little smoke and no leeks...
[quote="jessie928"]
maybe you shoudl find something better to do other than diminishing your own view of your own idaquecies and inperfections by concerntrating on others ;)[/quote]
Pretty sure theres no leaks the motor it's just crying for a re-built i guess, blows no too little smoke. Though my friend said he seen blue smoke when i was revving it abit lol.