Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
endless air?
endless air?
can it be done
i want to set up a endless air but don't want to get rid of the air con!!!
is this at all possable? (that is does someone know a way to do it)
i want to set up a endless air but don't want to get rid of the air con!!!
is this at all possable? (that is does someone know a way to do it)
Re: endless air?
get over it boggedbogged wrote:http://www.outerlimits4x4.com/phpBB2/search.php
http://www.outerlimits4x4.com/phpBB2/search.phpwyliespatrol wrote:Tb42 can I fit another a/c compressor
in there ?
serious, its all been done before, even with plans for the brackets. your not doing anything ground breaking.
a while back i saw a tb42 gq with two air compressors - 1 for ac & 1 for compressed air.
they were basically side be side with a short belt, pulleys same size.
i am not familiar with the stock layout of a tb42 so i do not know if the positioning of the a/c unit was stock, but they fitted in there.
they were on the passenger side of the engine bay, tho i dont remember if they were top or bottom
they were basically side be side with a short belt, pulleys same size.
i am not familiar with the stock layout of a tb42 so i do not know if the positioning of the a/c unit was stock, but they fitted in there.
they were on the passenger side of the engine bay, tho i dont remember if they were top or bottom
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Considering the cost (of the unit AND the brackets), the drama of setting up the Endless Air compressor and the fact that it will be difficult to maintain considering its tricky position, why not consider a good quality electric compressor with an on board air system.
To get the full benefit of the Endless Air, you'll have to set up an on board air system anyway. If you have a second battery, you could set up one (or two) electric compressors for a similar result for probably less money and don't have the added complication of an engine driven compressor.
I had a converted Sanden SD508 compressor and switched to a two compressor (Ebay Max Air copies) system with 2 air tanks totalling about 25 litres hooked up to air lockers and an air line.
Just my 2c worth.
Dave Mc
To get the full benefit of the Endless Air, you'll have to set up an on board air system anyway. If you have a second battery, you could set up one (or two) electric compressors for a similar result for probably less money and don't have the added complication of an engine driven compressor.
I had a converted Sanden SD508 compressor and switched to a two compressor (Ebay Max Air copies) system with 2 air tanks totalling about 25 litres hooked up to air lockers and an air line.
Just my 2c worth.
Dave Mc
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Loose Screws 4wd Racing Team
Wyliesptarol, http://members.mcs.net.au/~grungle/endlessair.html has pretty much everything you need to know. If you can find a 7 piston Sanden comp, but they're a bit thin on the ground. Self serve wreckers are the gop, they were a common fit for aftermarket AC in the 80's. I found a 508 on a RWD Mazda 323.
Compressor - $38
Compressor brackets - $110 (I got lazy and had it all laser cut, could of easily cut and drilled it myself for way less)
Gaskets for compressor - $15
Grub screw and grease nipple for compressor - free
Braided air line from compressor - $40
Air tank, lines and random fittings - probably ran about $200
You'll need the air tank, lines and fittings if you want a serious set up anyway. What's a decent electric compressor worth? And how slow are they? Bump the throttle up a bit and tyres pump up in no time at all. Granted buying a premade kit is expensive, but they're just converted Sandens anyway.
Difficult to maintain? I filled it with grease when I put it on and give it a squirt every couple of months. Never thrown the belt and it's the same belt as the power steering.
I'm running a converted Sanden 508 on my TD42. Cost all up;bigbluemav wrote:Considering the cost (of the unit AND the brackets), the drama of setting up the Endless Air compressor and the fact that it will be difficult to maintain considering its tricky position, why not consider a good quality electric compressor with an on board air system.
To get the full benefit of the Endless Air, you'll have to set up an on board air system anyway. If you have a second battery, you could set up one (or two) electric compressors for a similar result for probably less money and don't have the added complication of an engine driven compressor.
I had a converted Sanden SD508 compressor and switched to a two compressor (Ebay Max Air copies) system with 2 air tanks totalling about 25 litres hooked up to air lockers and an air line.
Just my 2c worth.
Dave Mc
Compressor - $38
Compressor brackets - $110 (I got lazy and had it all laser cut, could of easily cut and drilled it myself for way less)
Gaskets for compressor - $15
Grub screw and grease nipple for compressor - free
Braided air line from compressor - $40
Air tank, lines and random fittings - probably ran about $200
You'll need the air tank, lines and fittings if you want a serious set up anyway. What's a decent electric compressor worth? And how slow are they? Bump the throttle up a bit and tyres pump up in no time at all. Granted buying a premade kit is expensive, but they're just converted Sandens anyway.
Difficult to maintain? I filled it with grease when I put it on and give it a squirt every couple of months. Never thrown the belt and it's the same belt as the power steering.
Yes, I have made up a bracket that spaces the power steering pump upwards (still uses the same hose but needs a new belt) and then mounts a VL commodore compressor underneath it.wyliespatrol wrote:Tb42 can I fit another a/c compressor
in there ?
I haven't fitted it yet, but there's definitely room. However, I think different TB42's have different A/C compressor arrangements.
Basically if I ever get around to bolting it in, it will have, on the passenger side of the engine, and looking from the top down:
Power steering pump
Compressed air compressor
A/C compressor
I think the ps pump and the compressed air compressor will be sharing a belt, from memory and without bothering to go and look.
This is NOT a difficult bracket to make, either.
This is not legal advice.
If you want to know for sure contact "EndlessAir" at endlessair@endlessair.com.au or checkout www.endlessair.com.au
I would agree.full-boost wrote:let me guess hobbit, you work for them or sell them or have some sort of steak in them. the ONLY posts you have done on here are related to endless air, and ONLY to direct people to using genuine. if you do have something to do with them, it would be wrong of you not to say so!
I also think there an overpriced POS. Cheaper to go thru a bunch of old sandens from the wreckers than buy theres.
THOUGHT FOR THE DAY....
TheHobbit81 wrote:If you want to know for sure contact "EndlessAir" at endlessair@endlessair.com.au or checkout www.endlessair.com.au
Might be good if your site worked with firefox & had an index.htm in there too rather than just browsing for files??
Posting quality not quantity!
Wanted: Stock HiLux Front Leaf Springs
Wanted: Stock HiLux Front Leaf Springs
Who is online
Users browsing this forum: No registered users and 4 guests