Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Swap 3L with 4.2

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 6
Joined: Tue Jan 06, 2009 7:21 pm
Location: Gold Coast

Swap 3L with 4.2

Post by cokeman »

i have a 3L petrol and was wondering if you can take it out and put a 4.2 EFI in with minimal hassel.
Posts: 1363
Joined: Tue May 13, 2003 10:54 am
Location: Scarborough, Qld

Post by bigbluemav »

Hi Cokeman

I THINK the gearbox is different to the 4.2. You may have to get a 4.2 gearbox and transfer case. I remember reading that the RB30 gearbox isn't as strong as the one on the 4.2 engines.
Big Dave, Scarborough, Qld
Loose Screws 4wd Racing Team
Posts: 6
Joined: Tue Jan 06, 2009 7:21 pm
Location: Gold Coast

Post by cokeman »

I've read that as well, has anyone done this or know of a place to get it done
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Posts: 121
Joined: Wed Dec 24, 2008 6:39 am
Location: pomona, sunny coast

Post by grinch2 »

most of the drive train is different gearbox transfer, drive shafts, the 3.0l transfer willl bolt to a 4.2 box but the shifter linkages are different and the flanges on the drive shaft seem to be different. if your going to the effort its probably not much more to drop in a gen 3 v8, use less fuel and go a lot harder :D
Posts: 54
Joined: Tue May 13, 2008 9:21 pm
Location: Sydney

Post by figjam_1985 »

Prob easier to sell and buy a 4.2 in the end
Posts: 4
Joined: Sun May 25, 2008 8:47 pm
Location: Vic

Post by Rollin-er-Rover »

So the 3.0ltr engine mounts are the same as the 4.2ltr's. just go straight in???
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Post by weeman »

Rollin-er-Rover wrote:So the 3.0ltr engine mounts are the same as the 4.2ltr's. just go straight in???
no they are different...
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Posts: 241
Joined: Fri Jul 11, 2008 8:19 am
Location: Newcastle

Post by nellyb1 »

stuff getting a v8.

i've been looking at droping out the 4.2 and throwing in a rb25det skyline motor.

Your gearbox isnt as weak as you think.
They are the same gearboxes that are used in the 300zx with twin turbos.
So just read into what you getting.

The rb25det has about 100hp more with a little tweak (about $500 worth) and you end up with just under 50 Nm les torque. but 1000rpm later.

This means that you need to change into low a little earier off road.

Also the big catch with this. you can get a Rb25det recon'ed engine from triple S engine in sydney for less then $2000.

its worth thinking about mate.
Do a search on here if you want, there is a few good links.
Posts: 121
Joined: Wed Dec 24, 2008 6:39 am
Location: pomona, sunny coast

Post by grinch2 »

you obviously havent owned a turbo rb30 patrol with big tyres, the gearbox is piss week ive destroyed 2 already and i dont abuse it. they may be strong in a car but not in a 3 ton fourby. the 4.2's have a lot lower first gear also.

the turbo rb30 is great fun, and there are endless things you can do to get big hp, but if you want low down grunt the 4.2 is the better choice.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests