Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

AP150 Cruise Control into 100 Series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 17
Joined: Sat Jan 29, 2005 8:04 pm
Location: Melbourne

AP150 Cruise Control into 100 Series

Post by piperchau »

Hi,

Has anyone fitted a AP150 Command cruise control into a 100 series. I'm struggling to find the correct speed sense wire to connect to the cruise ????


THanks,

Mark
Posts: 17
Joined: Sat Jan 29, 2005 8:04 pm
Location: Melbourne

Post by piperchau »

Problem sorted. For any other poor sod with the same problem, pin 12 (purple) on the 16 pin plug behind the drivers kick panel is the speed sensor for factory cruise installs on early 100's
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

me too and where do you get them from
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Posts: 2
Joined: Sat May 10, 2008 8:28 pm
Location: Perth

Post by red hilux »

look on ebay
Posts: 17
Joined: Sat Jan 29, 2005 8:04 pm
Location: Melbourne

Post by piperchau »

$320 from Autobarn, but I think they are asking $360 now. There are a couple of ebay shops that have them.

I've used it on a couple of ling trips and had no problems with it. The guys that make the unit suggested the next model up (over $600) if I was doing loads of towing but the AP150 held its speed up some long steep hills whilst fully loaded.
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests