I have a 88 NF Pajero, was wondering if there is any after market front diff lockers for these.
I have had a look on the net with no success.
What sort of front lockers do people run in there Pajeros.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
front diff lock
Moderator: -Scott-
Do you have V6 or 4 cylinder - this is the deciding factor.
If you have a 4 cylinder you have the smaller 7.25" front diff so your only option is a Detroit custom made by Geelong Diffs here in Melbourne.
If you have a V6 you have the 8" front diff so the ARB (RD110) will fit along with the Lokka from 4wd Systems plus a custom Detroit. The custom Detroit will cost as much as the ARB anyway.
If you have a 4 cylinder my advice would be to convert to the V6 front end so you gain the larger diff, CV's and brakes. All bolt in stuff.
Oh and hi Shane.
If you have a 4 cylinder you have the smaller 7.25" front diff so your only option is a Detroit custom made by Geelong Diffs here in Melbourne.
If you have a V6 you have the 8" front diff so the ARB (RD110) will fit along with the Lokka from 4wd Systems plus a custom Detroit. The custom Detroit will cost as much as the ARB anyway.
If you have a 4 cylinder my advice would be to convert to the V6 front end so you gain the larger diff, CV's and brakes. All bolt in stuff.
Oh and hi Shane.
I just luv my "clacker Jabber"
Hiya Frank...long time no chat!
Yeah, as Frank describes, I put a Gen I V6 front diff, mounts, and CV axles into the front of my 4-banger and then put in an RD110. The only part that wasn't "bolt-in" was that I had to have my drive shaft shortened by 1.5 inches. Others who have done this mod still had to have their front drive shaft shortened, but not as much.
Yeah, as Frank describes, I put a Gen I V6 front diff, mounts, and CV axles into the front of my 4-banger and then put in an RD110. The only part that wasn't "bolt-in" was that I had to have my drive shaft shortened by 1.5 inches. Others who have done this mod still had to have their front drive shaft shortened, but not as much.
Joe
88 Montero (Pajero) 2.6L 5-speed - dual-locked, low-geared, armored, lifted, lit, rigged for dive... [img]http://www.fivethirty.com/images/blah.gif[/img]
88 Montero (Pajero) 2.6L 5-speed - dual-locked, low-geared, armored, lifted, lit, rigged for dive... [img]http://www.fivethirty.com/images/blah.gif[/img]
Who is online
Users browsing this forum: No registered users and 2 guests