Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Uni joint sierra rear

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Uni joint sierra rear

Post by Turbo Tonka »

hi i have a 89 wt sierra but with a narrow track rear centre and rear half of the shaft.The unis a bit sloppy,and our local parts shop couldnt really be much help and had little idea.

i have one here part number:-KOYO RUJ 1783 it has 25mm OD cups and is external circlip and about 64mm across joint flat to flat.

both my nt and wt unis are eternal circlip and seem to be 25mm cup,are they the same?I havent pulled the other one out yet and would like to know first.thanks
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

All 1.3's are the same.

1.0's have internal clips.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

The uni's are different front to back on the 1.3's
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

AFAIK No they're not. The come out of the factory with the same uni throughout. the only difference is between 1.0 and 1.3.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 265
Joined: Mon May 02, 2005 9:54 pm
Location: NEWY

Post by weaves »

My listings here are as follows

SJ410 - 1981-87 - RUJ- 1795 F&R - 1.0 W/ 25mm CAPS (INC STOCKMAN)
SJ413 - 1985-99 - RUJ- 1501 F&R - 1.3 W/ 22mm CAPS
SJ413 - 1987-00 - RUJ- 1795 F&R - 1.3 W/ 25mm CAPS


Weaves
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

I just replaced em and my front shaft's uni's were physically smaller than the rears.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

:?:

Never, ever, seen different cap sizes. I've heard of the part listing for different caps for 1.3 sierras too, but I've never seen a 22mm cap in a car.

I've seen a LOT of sierras.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

that looks like the same list of part numbers in the book at the shop i got mine from.Anyway it all turned out ok in the end i got the 783 and it fitted right.The bloke bought me 2 different uni,one internal,one external both 25mm cups but said he also had the 22mm cup out back aswell.
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest