Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hj75 brake pedal problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 260
Joined: Wed May 05, 2004 5:29 pm
Location: northern suburbs vic

hj75 brake pedal problem

Post by holeyhardtop »

Just after some advice before i put myself at the fate of a brake mechanic.
(thanks to those for the clutch adjust advice)

The brakes in my troopy were all fine until not being driven for a while, now the pedal sinks to the floor :shock: and takes 2 pumps each time its applied to get firm and stop the car. They still work but you have to pump it twice to get a firm pedal.

Question then is whats gone wrong :? ? I assume a seal somewhere, i have had a suggestion it's just a seal in the brake master cylinder but i don't know how to diagnose this.

Is there some way of me checking before i get a mechanic's opinion so that i don't get sold things i don't need.

Dave.
[quote="4runner2.8"]i have one.... and iv done a few long hard pulls with it too.[/quote]
Posts: 190
Joined: Mon May 12, 2008 11:54 am
Location: nsw

Post by poppywhite »

Is usually in rear drums that seal fails first. remove the drum and check not hard to do. wheel cylinders not much$$. Is there fluid stain on master ?? can take a bit for it to show.
Posts: 128
Joined: Tue Jan 20, 2009 12:33 pm
Location: Under your bed!!!

Post by mutilated »

may just be an adjustment thing. If the pedal is good after 2 pumps then the pistons have been pushed out so that things are touching. Try to adjust them and see how it goes. You can put a pair of vice grips on the brake hose to eac wheel to check which one is the problem
Posts: 2
Joined: Tue May 05, 2009 10:37 pm
Location: Mandurah, WA

Post by Robbo88 »

Hi holeyhardtop

Did you find where the problem was coming from? i'm having very similar problems with mine atm.
Posts: 126
Joined: Thu Sep 04, 2008 4:00 pm
Location: Jimboomba Qld

Post by !<Hilux-4X4>! »

ive got the same problem with my fj45 its not the master cyl check your rear drums thats all myne was i paid $123 new for the rear wheel cyl as they have 2 on each side hope this helps
Posts: 260
Joined: Wed May 05, 2004 5:29 pm
Location: northern suburbs vic

Post by holeyhardtop »

turns out it just needed a good bleed and re adjust everything, it had been sitting for a while and has given no trouble since ;)
[quote="4runner2.8"]i have one.... and iv done a few long hard pulls with it too.[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests