HY just wondering if some one may have some idea as to why after fitting 5 yes 5 set off 2" lifted spring to the rear off my sr5 dual cab my diff dont sit central in the wheel arch and the driveshaft slip joint is extended way further than it should be.
Ihave messured My mates 08 hilux with the same lift and mine is about 30 ml longer in lenght center to center both cars are the same and were built at the same time.
Any body got any ideas
any body else having problems with this model as toyota dont like that dirty warranty word was told because off lift I voided my warranty but they sell ARB stuff in their branches
CHEERS DAVE
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
08 hilux problems
Moderators: toaddog, Elmo, DUDELUX
Mines an SR, but with the reset leaves and inch block, the rear sits at about 2.5"........
no tailshaft problems at all.
Dave,
no offence mate, but did you or a store fit the springs? what brand?
are they the right way around?
I cant understand how it would be that bad after so many spring replacements.
did you replace with the same brand spring each time?
pictures here would help, both of wheel location within the guard, pics of the springs and maybe even tailshaft/diff position.....
no tailshaft problems at all.
Dave,
no offence mate, but did you or a store fit the springs? what brand?
are they the right way around?
I cant understand how it would be that bad after so many spring replacements.
did you replace with the same brand spring each time?
pictures here would help, both of wheel location within the guard, pics of the springs and maybe even tailshaft/diff position.....
[url]http://www.monsterrides.com.au[/url]
Who is online
Users browsing this forum: No registered users and 67 guests