Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

any one have a v6 tick tick tick tick tick?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 134
Joined: Wed Nov 26, 2008 11:41 pm
Location: QLD

any one have a v6 tick tick tick tick tick?

Post by 4x4joel4x4 »

hey chaps

i have a v6 3.5 1996 paj long wheel base

and i have a tick tick tick coming from the eng head.

i was thinking tapets? may be.... i tried putting some tappet free up oil in , but i think it just sounds worse to be honest... i dont think its harming my eng but its just annoying and makes me feel like it drives like shit.. ha ha.

if it is my tappets can they be ajusted or are they gone and need replaced?

cheers
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Post by mhgill »

They are hydraulic tappets. = non adjustable.

They will need to be replaced, which is a decent sized job. Either put up with it or get them changed, if you do, change the valve stem seals at the same time!
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Posts: 134
Joined: Wed Nov 26, 2008 11:41 pm
Location: QLD

Post by 4x4joel4x4 »

thats unlucky.. ha ha oh well i better get onto it before it drives me nuts...

cheers for the heads up

joel.
Posts: 40
Joined: Sun May 04, 2008 8:17 pm
Location: melton

Post by gp339gm339 »

It could due to the oil you are running or the tappits are partly blocked, I have seen a procedure where you have rev the motor a number of times and this helps .

Also do a search of this forum

http://www.pajeroclub.com.au/home/publicforum/
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Mate when I got my 3.0 NH many moons ago it had 102,000K's and clicked like hell.
I added a dose of Slick 50 and about every 10,000K's or so it would start to click again so I added the Nulon lfter quiet stuff which would work for another 10,,000K's.
It's worth a try before to replace the tappets and spend a lot of $$$.
Also a good oil change may help at the same time.
It's a common problem with these motors so your not alone.
I just luv my "clacker Jabber"
Posts: 353
Joined: Sun Jun 27, 2004 9:50 pm
Location: Perth, Western Australia

Post by South »

If I recall correctly, the procedure is to have engine at operating temperature. Hold the revs at 3k for 20 seconds, then idle for 20 seconds, rev to 3k for 20, then idle. Repeat about 10 times and then go for a drive.

This should flush any crud out of the lifter. Best to be done with fresh oil, also if you change fluid every 5k you wont get the very often if at all.

We have the DOHC, with 260k on the clock, never opened and there is no ticking due to good servicing.
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

South wrote:We have the DOHC, with 260k on the clock, never opened and there is no ticking due to good servicing.
Is that a sales pitch....................................

Did you end up selling it?
Posts: 353
Joined: Sun Jun 27, 2004 9:50 pm
Location: Perth, Western Australia

Post by South »

Anyway to get air time :D

Hasn't sold yet, very little interest, might have to reduce the price... Am going to have 4 cars in the driveway soon :(
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

3.0 with same issues, caused by low oil and air in the lifter. Used Lifter Freeer Upper or something called like that from Repco (14 dollars) - never had the issue again. Only time a Repco supplied product has ever worked for me:)
Nice gq swb ute chop with a huffer for the good times
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests