Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

leaf spring rates

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

leaf spring rates

Post by stokedapollo »

im trying to find out the standard rate of mq/mk springs or close enought to what the rating is any help would be good
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Give me some measurements and I can give you the rates.

I would need:

Number of leaves in each pack
Thickness of each leaf (middle and ends - to check if tapered)
Eye-Eye measurement with springs perfectly flat (or best estimate)
If the leaf ends are square cut, flattened, or v-cut
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

chhers mate
i will get those for ya
i have 3 leaf parabolics in the rear of mine
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

ISUZUROVER wrote:Give me some measurements and I can give you the rates.

I would need:

Number of leaves in each pack
Thickness of each leaf (middle and ends - to check if tapered)
Eye-Eye measurement with springs perfectly flat (or best estimate)
If the leaf ends are square cut, flattened, or v-cut
When you get the relevant info can you publish here please... others as well as myself might be interested in how it's done/calced... :cool:
the simplified version of course..
Show me the money..SHOW ME THE MONEY
Top
Posts: 384
Joined: Wed Mar 19, 2008 3:28 pm
Location: narre warren victoria

Post by stokedapollo »

i will try get all details of me springs tomoz and post up for him then we can all find out he he
What I like to say to the buy a GQ thing....

my MQ is a convertable, hows about your GQ! The Finger
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests