Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

92 wide track front lockrite install

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

92 wide track front lockrite install

Post by zookprojectfnq »

I am in the process of installing a powertrax loctite locker in front. I have the diff apart, and it is only a 2 pinion diff. Whats the go? My locker kit seams to suits 4 and doesn't have the little cross that the cross shafts slips threw as there is only one cross shaft. The spacers supplied in the kit don't touch anything. the kit I have came with no couplers and I was told by the supplier it suited the front. It appears to be for a 4 pinion diff. I tried the search button and got a step by step install but that was for a rear and was a 4 pinion diff
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

Mine is a 1510. I found this in a search. Just wondering if any one else has tried
sheps wrote:yep 1510 can go in a 2 pinion center and is in the fitting instructions that i got.
the 1520 or 1530 (cant remember off the top off my head) has the 26 spline
coupling.
my front lockright works perfectly while the rear one is a bit off a pig.

just remembered something, apparently around 94 or so a different side gear
went into the 2 pin carrier and it needs a bit machined off it to work with the
1510 lockright. mine is a 89 sierra. there are a few threads on pirate about it.
Top
Posts: 4073
Joined: Fri Apr 06, 2007 8:13 pm

Post by lump_a_charcoal »

Ask shep on Auszookers...
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

just put it together as if it was a 4 pinion, it will work.
www.auszookers.com
Top
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

If you got the locker from Locktup just give Chris a call and he will sort it out, as he helped with the install on mine.
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

Yeah I did get it from Locktup. I rang Chris today. He said to use the old cross shaft and remove spacers supplied with locker kit. Havn't had a chance to try it yet
Top
Posts: 377
Joined: Fri Jan 06, 2006 4:03 pm
Location: Perth

Post by VR Rodeo »

This is what was left after mine was installed

Image
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Top
Posts: 538
Joined: Tue Jan 13, 2009 3:52 pm
Location: sydney

Post by danssurf82 »

my mate has a lockrite in the front of his sierra and he keeps snapping front cv's doing basic little stuff... whats the go?
Top
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

danssurf82 wrote:my mate has a lockrite in the front of his sierra and he keeps snapping front cv's doing basic little stuff... whats the go?
too much right foot ;)
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Top
Posts: 211
Joined: Wed Jun 27, 2007 7:19 pm
Location: brisbane

Post by suzimad »

danssurf82 wrote:my mate has a lockrite in the front of his sierra and he keeps snapping front cv's doing basic little stuff... whats the go?
he needs to learn how to drive ?
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Ditto

I have broken one in 2 years of abusing mine. and that was a ledge with revs hitting the hub into the bank.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 262
Joined: Sun Sep 11, 2005 8:39 pm
Location: ipswich

Contact:
Contact Zuki

Post by Zuki »

use a rear wide track hemisphere and a rear wide track crownwheel.
thats whats in the front of mine. it accomidates the 4 pins. should work
cheers heath
gu ute 4"coils, amada xtremes, chopped chassis 450mm, 37" treps, rock sliders, internal cage, roof sliders, f&r air lockers, uhf, modified highmount winch, UFI turbo, km diesel inj pump.
Top
Posts: 146
Joined: Fri Oct 17, 2008 5:17 pm
Location: Cairns

Post by zookprojectfnq »

Nah its been in for a week. Used original 2 pinion centre. What VR rodoe had left over is the same as i had left over. It works a treat. If any one has a problem with this , give Chris from locktup a call.
Top
User avatar
sheps
Banned
Posts: 342
Joined: Wed Feb 20, 2008 8:29 pm
Location: katherine nt

Post by sheps »

like i said many posts ago it is an internet myth that lockrights
need to go into a 4 pin carrier.
www.auszookers.com
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 44 guests