Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

oil pressure td42

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

oil pressure td42

Post by macneil »

Hey guys just put a second hand td42 in my trol just wondering if this is where the oil press guage is ment to sit.. it drops a little when revving..

Image
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Oil pressure should rise when you rev it, not drop.
Top
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

will check it again i think it started to rise when revving the other day this pic was taken idleing when i first got it running.. might have been filling oil filters..
Top
Posts: 38
Joined: Wed Feb 21, 2007 1:15 pm
Location: Burra NSW

Post by Burra Boy »

Most GQ oil pressure gauges are really inaccurate. I've got a VDO gauge in my wagon as well as the standard gauge and the VDO gauge shows 5 bar at revs when hot, 2 bar when idling. The standard gauge shows maybe .5 bar idling and 2 when revving. Get an after market gauge for peace of mind. My 2c worth :cool:
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
Top
Posts: 38
Joined: Wed Feb 21, 2007 1:15 pm
Location: Burra NSW

Post by Burra Boy »

Sorry, lost a line in the previous post somehow. The VDO gauge shows 5 bar hot and revving, 2 at idle, while the standard gauge shows 1-2 hot and revving and .5 at idle. Get an aftermarket gauge, IMO
Burra Boy. 1x 89 LWB wagon, turbo, frozenboost IC, lots of stuff. 1X 90 leafie ute, AXT turbo, tough as nails and about as comfie...
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

im gettin around 30psi at hot idle and 50-60psi hot driving at speed. if that helps

gq td4.2 turbo 230,000kms
Top
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

how do you run an aftermarket oil presure guage aswell as the standard one. Don't you need to remove the standard sender unit inorder to install and aftermarket one?

mine reads around 2 and up a little when reving. TD42 430 000 kms
Top
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

ive seen the sender units that screw onto your oil filter or something but yet i am looking at getting water temp and oil pressure guages for it..

how have you hooked these up?
Top
Posts: 103
Joined: Tue Nov 04, 2008 7:04 pm
Location: Qld

Post by nissannewby »

there is a port on the exhaust side they use for when you put an aftermarket turbo on you can use that for an aftermarket or put a t peice in where the factory sender is
Top
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

i have a 't' piece in the standard oil pressure switch spot. autometer gauge goes in one side, stock oil pressure switch n the other.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests