I am planning to swap this engine (JDM) in a car that is not a Supra. But reading the parts calalog and wiring diagram, there are couple of parts that not really what are they for and if the engine will run without it (or how to skip it).
This is a parts diagram where you can see the "Fuel Pump Control" and "Throttle Control", that are inside the car, so will not came with the engine (ebay USA).
Thanks in advance for your help, there is nobody that could help me down here.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1JZ GTE VVTi swap question
Moderators: toaddog, Elmo, DUDELUX
1JZ GTE VVTi swap question
Suzuki SJ413, G16B MPFI, Kick Tranny, 1.8:1 & 4.16:1 Tcase, Coils, Q-elliptic , RS9010, Toy 8"+TLC 8", R&P 4.88, ARBs, Iroks 36X13.50, 10" Beadlocked wheels.
1994 3.0 Pathy
1994 3.0 Pathy
Fuel pump control is not needed. The best way to control the fuel pump on this engine is to use a tacho-metric relay (used in LPG systems) They switch on when they see a tacho signal.
Throttle control i could only assume is cruise control or tractrion control, Either way not needed.
Steve
Throttle control i could only assume is cruise control or tractrion control, Either way not needed.
Steve
KILLA KUSTOM KABLES
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
CUSTOM AUTO ELECTRICAL SPECIALISTS
0404811498
LS1 & DURAMAX ENGINE CONVERSIONS, DRIVE IN DRIVE OUT. PATROLS AND CRUISERS
LS1 STANDALONE HARNESS $475ex
Ans what is the function of it? To stop the fuel pump when high pressure is reached?killalux wrote:Fuel pump control is not needed. The best way to control the fuel pump on this engine is to use a tacho-metric relay (used in LPG systems) They switch on when they see a tacho signal.
Throttle control i could only assume is cruise control or tractrion control, Either way not needed.
Steve
Will the engine runs with that 2 wires that runs from the Fuel Control Box to the ECU empty?
Can not find info about the Tacho metric relay, anyone?
Suzuki SJ413, G16B MPFI, Kick Tranny, 1.8:1 & 4.16:1 Tcase, Coils, Q-elliptic , RS9010, Toy 8"+TLC 8", R&P 4.88, ARBs, Iroks 36X13.50, 10" Beadlocked wheels.
1994 3.0 Pathy
1994 3.0 Pathy
Who is online
Users browsing this forum: No registered users and 0 guests