Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear mounted radiator water pipes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1167
Joined: Mon Nov 04, 2002 11:50 pm
Location: Rockingham W A

rear mounted radiator water pipes

Post by duncan »

Want to mount my rad in the rear of my comp extra cab hilux running a vs v6 motor and rad but have very lttle spaces to run the pipes to the rea.

So how much do you think it will affect flow and cooling by reducing the pipe size from 38mm to 25 between the motor outlets and the inlets on the rad.

I know that presure should rize as presure is related to resistance to flow but would it be to much .Any help would be apprecated

Duncan
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

If anything you need to use a larger diameter pipe for greater distances so flow remains adequate, i definately wouldnt be using smaller pipes.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests