Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

85 hilux wiring problem

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 19
Joined: Thu May 28, 2009 5:52 pm
Location: brisy

85 hilux wiring problem

Post by 19richo90 »

in my lux, the dash doesnt light up and the tail lights dont work, like brakes, reverse and the indicators work. but no lights. now on my old car the same thing happened, but it was just a fuse. so im thinking maybe they are on the same circuit. but i have changed all the fuses and still have the same result, does anyone have any ideas or helpful pieces of info.

thanks very much in advance

Richard
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

Don't forget there's two fuse boxes, one under the dash as well
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Posts: 19
Joined: Thu May 28, 2009 5:52 pm
Location: brisy

Post by 19richo90 »

yeah iv replaced all the wedge type ones, behind the battery, and under the dash.
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

Most likely a relay, try the ones on the fuse panel under the dash
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Posts: 19
Joined: Thu May 28, 2009 5:52 pm
Location: brisy

Post by 19richo90 »

yeah ok, can i just bell them out on the meter to check them?
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

you can do that to check the windings in the contact switch, but it's usually the silver contacts that wear out

here's a diagram
Image

the numbers on the pins may be different, but you get the idea, you'll have to energise the windings on the switch [ 85 & 86 ] to make sure the relay is switching, and then check the continuity across 30 & 87.
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Posts: 19
Joined: Thu May 28, 2009 5:52 pm
Location: brisy

Post by 19richo90 »

yeah yeah yeah thats right, and if its sweet it will click? thanks mate you've been a big help
Posts: 19
Joined: Thu May 28, 2009 5:52 pm
Location: brisy

Post by 19richo90 »

thanks mate you were a really big help, changed it today and its all good to go. thanks very much i really appreciate it
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Post by Breaker Brother »

;) Glad to help
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests