Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.2 Idler pulley bearing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 65
Joined: Mon Jan 07, 2008 1:24 pm
Location: Victoria

4.2 Idler pulley bearing

Post by noodle »

Hi all.

The bearing in the idler pulley on my GU 4.2 is grinding intermittently.
Ive heard of some cheap fixes for the ZD30 but not the 4.2. I imagine nissan would charge a fortune for one.

Anyone know of a cheap fix ?
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

just pull it off and you can press the bearing out, if you dont have a press then you can use some sockets and a vice. Then take the bearing to a bearing shop to match it up and it should only cost you $5 - $10
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 65
Joined: Mon Jan 07, 2008 1:24 pm
Location: Victoria

Post by noodle »

now why didnt I think of that ? :oops:

Cheers Mate
Top
Posts: 218
Joined: Thu Jun 26, 2008 6:41 pm
Location: Bundy, QLD

Post by rumpig89 »

i replaced mine bout 6 months ago. Forget the bearing size but was under 3 dollars and took about 10 mins to change over... from turn car off to turn car on.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests