Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear diff help

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 21
Joined: Mon Mar 09, 2009 10:02 pm
Location: Brisvegas

Rear diff help

Post by sic60driva »

Just wondering how the hell do you fix the rear pinion in the diff ? any help would be awesome.
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Re: Rear diff help

Post by jessie928 »

sic60driva wrote:Just wondering how the hell do you fix the rear pinion in the diff ? any help would be awesome.
ity would actually help if we knew what was wrong with it?
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
Posts: 21
Joined: Mon Mar 09, 2009 10:02 pm
Location: Brisvegas

Post by sic60driva »

its leaking oil badly thats what the mechanic said.
Top
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

Put a new seal in there.. Would be handy to know what its in before better advice can be given..
Top
Posts: 38
Joined: Sun Oct 28, 2007 9:52 pm
Location: Whyalla, SA

Post by harlequin »

Its in a 4 wheel drive :lol: could even be a sic 60 series, but that is an ambitious guess.
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

you need to determine whether it is just the seal or if it is the pinion bearings that have collapsed.

if it is just the seal then you can repair it by simply replacing the seal, but if the bearings have collapsed the diff has to come out to be overhauled.

with the transmission in neutral, does the pinion shaft have any up/down/side to side/in and out movement? it should have none. if it moves, the bearings are toast, and it has to come out.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests