Just replaced the factory deck, (double din radio/cassette deck) with the a Clarion CD tuner on a 1993 GXL L/Cruiser (4.5 litre petrol). The old deck wasn't working.
Went down to my local Repco store and purchased the harness adapters which converts the factory Toyota looms to a Clarion. Plugged it together and it all works perfectly except for the radio, which is dodgy. This points to the aerial. (I have plugged the aerial port into the back of the Clarion deck.)
When installing this adapter, there is a 2 wire loom that went into the factory deck but this is not connected to the Repco adapter? Would my aerial be powered in some way even though its non electric?
Any help would be great.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
CD Tuner not picking up radio stations
Moderator: -Scott-
Yes i have seen on some cars, my subaru is same the antenna is a powered unit.
is the 2 wire loom a normal colours? (ie one solid colour and the other dashed or similar?)
is the 2 wire loom a normal colours? (ie one solid colour and the other dashed or similar?)
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 6 guests