Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fd35t any one running 1

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 46
Joined: Thu Jun 25, 2009 3:50 pm
Location: new zealand

fd35t any one running 1

Post by gonfellon »

hi iam running a nissan fd35t in a project 4x4.was trying to find out if i intercool it what revs would these motors pull safely.what weight?and would it crawl some big tires or pull revs to spin them. standard specs i found are 130bhp@3000rpm is that its max rpm?dont no anything on these motors only that i now own one .bit dirty at moment but seems to be strong motor and good toe vehicle from what i was told.but ive only driven it from letterbox to back garden lol as plates were handed in.so hence the project4x4
Image
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

great motor.. small truck motor hence the max 3000rpm, more boost and an intercooler would be awsome as for more revs i dont think you would need it with the extra power. I think with more revs you will run into engine balance issues. good luck with the project
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

I'd be trying to track down gearbox and transfer case upgrades/swaps instead of engine performance. Plenty of room for an intercooler in there by the looks of it anyway!!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests