Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.5td. more grunt
Moderator: -Scott-
2.5td. more grunt
I have just bought a 2.5TD triton and was wondering if there is any tricks to gettin a bit more grunt outta the lil donk... not lookin for a massive increase, just wondering if theres any lil things ppl do to these that they benift from?
I have an intercooled 2.5 TD from a 1990 NG Paj. I got a 2.5" free flowing exhaust fitted, and then took it to a diesel specialist who "upgraded the fuel pump" (i'm not exactly sure what he did) and upped the turbo boost from about 8psi to 12psi. My power went from 45kw at the wheels to 60kw and now I have 591nm of torque. It was amazing (the best $1700 I have spend on my car- $420 exhaust, $900 fuel pump upgrade + dyno tune, $400 fuel pump repairs) and what's even better, I did get 50km more per tank of diesel. I am really keen to take my car back to the guy and have him dyno-tune it again and also check/replace my fuel injectors if necessary. I reckon this time if I need new injectors, it will set me back around $700.
I never expected to fit a 2.5" exhaust (i've always had 2.25"), but this guy told me to go 2.5", and no I don't have a turbo dump pipe from the turbo back... I hope that this info helps.
I never expected to fit a 2.5" exhaust (i've always had 2.25"), but this guy told me to go 2.5", and no I don't have a turbo dump pipe from the turbo back... I hope that this info helps.
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.
1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Have you tried the 3 washers technique? Its basically adding 3 washers .
to the spring. delaying the opening of the valve to increase the turbo boost pressure before the valve opens. I did this with my land cruiser and i can honestly say that power increased and reduce the blacksmoke emission. I learned about the technique from friends who have the pajero 4D56TD engine. Search the net for more topics on this. It will cost you only 6 washers , 3 per side (less than 1$) .
to the spring. delaying the opening of the valve to increase the turbo boost pressure before the valve opens. I did this with my land cruiser and i can honestly say that power increased and reduce the blacksmoke emission. I learned about the technique from friends who have the pajero 4D56TD engine. Search the net for more topics on this. It will cost you only 6 washers , 3 per side (less than 1$) .
Who is online
Users browsing this forum: No registered users and 3 guests