Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Body roll at speed

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 3
Joined: Mon May 25, 2009 1:44 pm
Location: Carlsruhe

Body roll at speed

Post by BigFTruck »

Hi,

I'm running a Rangie Classic, chopped to a ute, comp truck.
GU front and rear diffs, 4" lift King Off-Road Suspension and a Hilux steering damper, 35" tires on 15" rims.

Question: Above 80kph on the road the ute becomes very unstable, body roll is noticeable and the ute moves around the road quite a lot.

Any suggestions? Should I fit a heavy duty RTC steering damper, sway bars or is something else wrong???

I haven't tried doing 80+ off road yet up a dry creek bed, that's next!!

This truck is entered in the 2010 OBC so I've got a few months to get this sorted and then testing, testing, testing :)
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Probably a combination of tall springs, soft shocks, lightened body etc. RTC damper wont help with body roll only with steering kickback, check your angles and swivel pre loads if you are getting the wanders up.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 46
Joined: Thu Jun 25, 2009 3:50 pm
Location: new zealand

Post by gonfellon »

could be loose wheel bearings,
pan hard bushes,tie rods,
play in steering box.grab some one
and get them to push and pull the front corner.
whilst you have a look underneath for any movement

i would think castor would of been fixed
with diff and spring set up
pays to get wheel alinement done
to check if no luck with above
Posts: 3
Joined: Mon May 25, 2009 1:44 pm
Location: Carlsruhe

Post by BigFTruck »

Thanks for the suggestions.

I've booked it in to Rangie 4X4 Automotive for a check-up, chatted with Adrian this afternoon and he suggested bringing it for an inspection and then we'll go from there.
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Post by uninformed »

you say king offrad suspenion??? coil overs or kings springs????

what front radius arms are you using?

are your rear trailing arms stcok lenght? are you still using the original A frame?

what is your castor?

are the diffs full width nissans?

are your panhard and drag link parrallel? whats the difference in lenght between the 2?

Serg
Post Reply

Who is online

Users browsing this forum: No registered users and 51 guests