Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Smoke/exhausting coming out of engine bay

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Smoke/exhausting coming out of engine bay

Post by phraze84 »

Hey Guys. Well after not running for 7 or 8 months I finally turned on the feroza. With the radiator back in I thought I should be ok to go. But now ive noticed alot of smoke or exhaust coming out of the engine bay. I think it’s a cracked manifold but haven’t been able to pinpoint it yet.

Is there anything else that it could be before I take the exhaust apart?
I got a sweater for Christmas... I wanted a screamer or a moaner!
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

Have you got your exhaust manifold cover off? Take out the airfiltration (anything right-side of the radiator) to make it easier to get at the bolts.

Once thats off, you will be able to see if you have any cracks. Mine has 3... :roll:
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Post by phraze84 »

HAHAHA, yeah will do.

Is it possible to weld?

And ive got a shity cover over the manifold, im asuming its a heat shield or something. My mate reacons i can get rid of it. Should i keep it on or is it ok to run without one?
I got a sweater for Christmas... I wanted a screamer or a moaner!
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Oil leaking onto exhaust?

Yep, pizz the "heatshield" off.
bru21 wrote:What happens in goat, stays in goat!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I've got an uncracked manifold sitting in the junk pile - it will be heading for the scrap very soon, so get it whilst its available if your interested.

Its free to a good ( or any.... ) home but you have to take care of the getting bit. ;)
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests