Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mod Plate after Turbo fitment?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 9
Joined: Tue Nov 27, 2007 1:24 pm
Location: Brissy

Mod Plate after Turbo fitment?

Post by lilredluxury »

Is a mod plate req'd after fitting a surf turbo & 3in exhaust to a 2.8D hilux in QLD?
If so can anyone suggest a decent workshop around Brissie that can do it?

Im also considering getting a diesel mob to maybe check my fuel settings on a dyno just for peace of mind, any suggestions for where to take it and whether it'd be worth while? Cost?
(I've fitted a pyro & boost & set the fuel by watching the temp) It goes upto 500C pushing it over the gateway in 5th, is that about where it should be? (post turbo sensor in new dump pipe)

Oh did I mention I can now go over the Gateway Bridge in 5th & STILL ACCELLERATE with a 2.8 motor!!! :armsup: Definately the best mod yet!
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

You'll need one for the turbo fitment but not for exhuast
Posts: 206
Joined: Tue Apr 12, 2005 1:59 pm
Location: Rockhampton QLD

Re: Mod Plate after Turbo fitment?

Post by Pauwolf »

lilredluxury wrote: Oh did I mention I can now go over the Gateway Bridge in 5th & STILL ACCELLERATE with a 2.8 motor!!! :armsup: Definately the best mod yet!
If you keep doing that you will be looking for a new gearbox, trust me i went through 4 of them

Paul
91 FJ 80 Project on the go - air lockers, 3in lift, super duper 3F, 36" pedes, toyota V8 getting prepped now
Posts: 9
Joined: Tue Nov 27, 2007 1:24 pm
Location: Brissy

Post by lilredluxury »

I know, but its so hard to resist with my new found power, (if you can call it that) after two years of hating uphills :oops:

So has anyone had their vehicle mod plated/dyno tuned in Brisbane and recommend anywhere for me to take the ute as I want to keep it legal.
Posts: 7
Joined: Fri Jan 11, 2008 10:18 pm
Location: Brisbane

Post by toddo »

I used Motsons on Beaudesert Rd, cost a bit over $100.
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

mod plate for a turbo? fark qld sucks!

Gear box should be fine?!? I have done 70, 000 in mine now since the turbo went in, i tow 1.5 tonnes for 1000km days pulling everything its got as well as similar trips unloaded.

I see no reason why the gear box cant handle the massive 100hp. I know of people who have used them behind much bigger HP applications without issue.

And :armsup: they are the best mod ever!
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
User avatar
HTH
Posts: 236
Joined: Thu Apr 09, 2009 9:37 am
Location: Coffs Harbour

Post by HTH »

I think he was saying that because of 5th being a weak gear in the 2.8d 5 speed G box. I THINK haha.

Im just about ready to bolt my ct20 on, but now im having problems getting the car to run properly.. think i may be up for a new injector pump :(.
95 lux, Under Construction..
60% of the time it works ALL the time
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

HTH wrote:I think he was saying that because of 5th being a weak gear in the 2.8d 5 speed G box. I THINK haha.

Im just about ready to bolt my ct20 on, but now im having problems getting the car to run properly.. think i may be up for a new injector pump :(.
balls!

5th gear is weaker in most cars, but no issues at all with mine yet and i drive it how i want too.

most gear box places ive ever spoken too have said its the back lash from round town driving that stuffs them - people getting into the softer 5th gear to early (sub 80kph) then on the gas - engine brake - on the gas - engine brake the whole time and that stuffs 5th in many cars.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

you need a turbo for a mod plate?? freeakin nazi's are running the place.
hands and mums dont count!!!
Posts: 41
Joined: Mon Dec 24, 2007 12:38 am
Location: Brisbane

Post by gotta_b_a_lux »

i just had mine done by a mob in capalaba cost $150 tho....

so am i supposed to down gear an use more fuel in higher revs on hills? i thought thats why i turboed it?
Lift it, Lock it and Roll
Posts: 15
Joined: Mon Sep 15, 2008 6:51 pm
Location: Brisbane

Post by mosus »

150!!!! that can't be right!

Was that at Mobile Home Car Services??? In hook Street
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

gotta_b_a_lux wrote:i just had mine done by a mob in capalaba cost $150 tho....

so am i supposed to down gear an use more fuel in higher revs on hills? i thought thats why i turboed it?
just don't use 5th if going slower than 80kph, 5th in most cars is an overdrive for when you are traveling highway speeds hence the go to 5th when doing 80 or more
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

Matt_85Lux wrote:
gotta_b_a_lux wrote:i just had mine done by a mob in capalaba cost $150 tho....

so am i supposed to down gear an use more fuel in higher revs on hills? i thought thats why i turboed it?
just don't use 5th if going slower than 80kph, 5th in most cars is an overdrive for when you are traveling highway speeds hence the go to 5th when doing 80 or more
x2 dont stress about using the new power to cruise up hills in 5th gear mate. it will be fine.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 58
Joined: Thu Jun 11, 2009 9:15 am
Location: Morayfeld

Post by dexter09 »

i had a mate who had to rebuild his gearbox from a 2.8 coz he was towing in fifth, he's a toyota mechanic and said that 5th gear is really only held on the shaft with a circlip coz their only an overdrive and because like nearly every gear (bar reverse) their not straight cut teeth it pushes against the circlip thats holding it on, so when you increase the load or the acceleration in fifth it therefore increases the pressure on the circlip and if you do it alot than the circlip can bust and fifth gear be lost to floating around the gearbox to be eventually be eaten by the rest of the gears. thats why they blow boxs, so when towing it is advised to only use up too 4th gear, if you read ur user manual its all there clearly written, they wouldnt waste the money on the ink writing it in there if it wasnt true
:cool:
Posts: 41
Joined: Mon Dec 24, 2007 12:38 am
Location: Brisbane

Post by gotta_b_a_lux »

mosus wrote:150!!!! that can't be right!

Was that at Mobile Home Car Services??? In hook Street
Yeh i think so mate, i thought it sounded steep but was recomended to go there so didnt ask around. my fault.

Cheers fellas, i tow a trailer to work everyday, and i travel without a trailer to toowoomba frequently so see how it goes, if i do blow a box can you get box's with a stronger 5th gear? surf box?
Lift it, Lock it and Roll
Posts: 58
Joined: Thu Jun 11, 2009 9:15 am
Location: Morayfeld

Post by dexter09 »

"Cheers fellas, i tow a trailer to work everyday, and i travel without a trailer to toowoomba frequently so see how it goes, if i do blow a box can you get box's with a stronger 5th gear? surf box?"

yeah surf box's are recomended to be stronger, i'm not sure on the exact reason, it's just wot i hear but same thing, you shouldnt tow in fifth on them either. i dont think it matters on the occasional haul but if your a builder or sumthin and constantly rowing a trailer, i wouldnt recomend it.
Post Reply

Who is online

Users browsing this forum: No registered users and 103 guests