Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clicky CV

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply

What to do?!

Leave the clicky CV in there, it should be fine
8
36%
Replace the clicky CV with the new one, and carry the clicky one as a spare
14
64%
 
Total votes: 22

Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

clicky CV

Post by get it up there »

Hello!! Im running lux diffs under my Zook, and the drivers side CV is clicking and carrying on. (It clicks when the locker is in, OR while turning on full lock). I have brought a new CV to replace it, thinking it was pretty much ready to let go at any stage. People have since told me that a CV can click all it likes, it just means that it is worn.. which doesn’t mean it will bust any time soon. So, should I replace the clicky one with the new CV, and carry the clicky one as a spare, or just leave the clicky one in there? Thanks :)
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Posts: 2472
Joined: Tue Jun 01, 2004 4:17 pm
Location: Blaxland... Just up from Renriff!

Contact:
Contact -Nemesis-

Post by -Nemesis- »

May as well get the most life out of it, drive it till it breaks!
Lovin the FZJ105-T, bling by Ryano
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

Use the clicky one as a spare. Broken birfs can make a mess of the inside of the knuckle.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Re: clicky CV

Post by redzook »

get it up there wrote:Hello!! Im running lux diffs under my Zook, and the drivers side CV is clicking and carrying on. (It clicks when the locker is in, OR while turning on full lock). I have brought a new CV to replace it, thinking it was pretty much ready to let go at any stage. People have since told me that a CV can click all it likes, it just means that it is worn.. which doesn’t mean it will bust any time soon. So, should I replace the clicky one with the new CV, and carry the clicky one as a spare, or just leave the clicky one in there? Thanks :)
how is your inner axle seal?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

I'd change it. It's not a hard job just a bit dirty an CV's are not that expensive. It sucks breaking a CV on the first obstacle of the day, even more so if you know it's worn and didn't change it.
Ben
Top
Posts: 292
Joined: Wed Jan 09, 2008 12:20 pm
Location: Ipswich

Post by hilux79 »

Also when it brakes you may lose steering in one direction if all binds up making it a pain to get home or somewhere level to change it.
Ben
Top
Posts: 450
Joined: Tue Jan 01, 2008 9:15 pm
Location: launceston, Tasmania

Contact:
Contact get it up there

Post by get it up there »

hhmmm, very true. Reckon i'll change it then, "just incase" ;)
F&R ARB air lockers, lux diffs, 4 link coil rear, drop shackles, inboarded ranchos, stage 4 reduction gears, 35" silverstones, 9500 winch, RUF, 1.6 EFI, swimming goggles
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests