Guys have asked around local suppliers to why the need to lower the brake proportional valve at rear of a GQ. SO far responses have been vague.
What’s the reason, is the length its extended proportional to the lift that you fit.
Looking at lifting my truck and trying to do as much home work as I can.
Before anyone asked I have searched with no luck.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Brake proportional valve extention
Hi guys,
I have just fitted one of these to a 5" lift, have to say i laid under the GQ and spent a bit of time trying to figure out HOW MUCH tension i should be putting on the spring?????
Anyone got an idea how i should actually set this up?? i basically grabbed middle ground and loaded just a little tension onto the spring.
Guidance would be appreciated.
Cheers guys
I have just fitted one of these to a 5" lift, have to say i laid under the GQ and spent a bit of time trying to figure out HOW MUCH tension i should be putting on the spring?????
Anyone got an idea how i should actually set this up?? i basically grabbed middle ground and loaded just a little tension onto the spring.
Guidance would be appreciated.
Cheers guys
Who is online
Users browsing this forum: No registered users and 70 guests