Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Got a problem with my 80 series 1992 1HD-T (bigger late model brakes) when I put my foot on the brake pedal it does not return it just stays there and you either have to give it a tap with your foot to make it return or put your foot under it and pull it back up (It doesn't do it all the time but enough to annoy). Does anyone know what the problem may be? I have lifted it 4" about 2 months ago but don't think that will have anything to do with it unless maybe the proportional valve? Its had a new master cylinder about a year ago and rebuilt calipers at about the same time.
Want to sort it before I put the 35's on
Cheers
James
NZ
The only other thing that would cause it is vacum. Unless it pulling a lot of vacum and still holding the pedal down. Sure sure how that would happen though. You could try another vacum body. I would still check the return spring first though.
it just stays there and you either have to give it a tap with your foot to make it return or put your foot under it and pull it back up (It doesn't do it all the time but enough to annoy). Does anyone know what the problem may be? I have lifted it 4" about 2 months ago but don't think that will have anything to do with it unless maybe the proportional valve? Its had a new master cylinder about a year ago and rebuilt calipers at about the same time.