Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Clutch Cable Rubbing

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Clutch Cable Rubbing

Post by smellypaddler »

Hi Guys,

Has anyone had any problems with the clutch cable rubbing on a Feroza? It was working fine and then one day it started making this god aweful noise everytime the pedal goes in and out. I have had a look and can't figure out how to stop it from rubbing. It sounds like the cable is catching on something between the pedal and the exit to the firewall.

ANy ideas?
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Post by smellypaddler »

on closer inspection with the help of an assistant I have narrowed it down to the cable rubbing in the housing near the battery. Do you think this means the cable is on its way out?

Any ideas on where to source a new cable form and a rough price?

Also any tips on how to get some lube into the cable housing?
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Post by smellypaddler »

%$@%^$@^%$@^%$@^% aaaaarrrrrgghghhh

I lubed the cable and put it back on the pedal and all of a sudden nothing. The padal is now limp and even though the pedal moves the cable it won't go into gear. I can manually move the lever underthe car as well and nothing.

I think the clutch fork has gone which means I'm outta pocket another $6-700 for a POS that I don't want any more. If only I could afford another car I'd burn this one in a heartbeat.
Last edited by smellypaddler on Sun Nov 08, 2009 10:13 am, edited 1 time in total.
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

The clutch mechanism is pretty tough, I mean I cant see anything other than a failed clutch or throwout bearing that has come apart (or the springclip that locks it to the arm broke).

When you move the arm underneath the car, is it hard as hell with tons of pressure, or easy?

Image
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Post by smellypaddler »

it's easy. Last night I tried again to put it into gear bbut now I can't get it to go into any gear. Before then it would go into all gears without needing the clutch pedal pressed or manipulated manually.
Posts: 73
Joined: Sat Nov 01, 2008 1:57 pm
Location: Melbourne

Post by Shambles »

Sounds like you may have broken a inner spring or 2 on the clutch plate. I broke 2 inners and 1 outer spring was seized a few years ago.

clutch kits arn't that expensive, just make sure you have the flywheel trued again. my 2c

try either of these guys for parts.

Daihatsu / Toyota
621 Elizabeth St 1ML
92828700 1300881234

Abacus Auto Parts
1300305611

cheers
shambles
Posts: 88
Joined: Wed Sep 01, 2004 7:58 pm
Location: Malvern - Melbourne

Post by smellypaddler »

Thanks guys. I've never replaced a clutch before so I think I'll work out how to get it towed and have someone else do it for me. More money for the money pit.
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Post by Goatse.AJ »

Clutch is pretty straightforward. May well be the fork, had that happen once. I had the same symptoms prior to it breaking too.
bru21 wrote:What happens in goat, stays in goat!
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Had the opposite happen - driven plate springs came loose and jammed the clutch on - most !@#$% inconvienient.

Auto's rule :cool:
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests