Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gu 4.2 aircon lifting engine revs 500 rpm????????

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

gu 4.2 aircon lifting engine revs 500 rpm????????

Post by Bingham »

lads truck im cruisng in at minute and have had a quick look if i have overlooked somehting please add link...


i know revs will climb slightly but 500 fark me.. eg 800 -->1300.. is like auto throttle comes on on cruise and is a right pain in the ass... what would be the cause and how would one fix?

any help appreciated....

bingham
2015 200 Series Gx TTD - ................ Fark 3L's -
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

on my gq there is a flat blade adjusting screw on the idle up gadget!
Not sure if the GU's are the same tho?
JB
Posts: 345
Joined: Wed Dec 24, 2008 11:58 am
Location: Mackay

Post by tye1986 »

i would say they havent adjust the air con idle i think it works off vacuum it is on the side of the injector pump 2 10mm bolts crack them and slide it forward. thats if its the same as my gq after i turboed mine and turned the fuel up i had to adjust this....
gq coil cab with stuff
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

tye1986 wrote:i would say they havent adjust the air con idle i think it works off vacuum it is on the side of the injector pump 2 10mm bolts crack them and slide it forward. thats if its the same as my gq after i turboed mine and turned the fuel up i had to adjust this....
yah, if it hasn't been set up right at the start you may not get enough adjustment from sliding the A/C idle up actuator along the injection pump on its mounting bolts,
if so you will need to adjust it at the back of the actuator as said.
the book spec for idle with A/C on is 1200rpm,
this in my opinion is way to high, try crawling through slow traffic and the A/C turns on and the car takes a lunge forward, it can scare the fxxk out of you.

I like to set them so the idle doesn't change up or down when the A/C cuts in and out.
Living the dream on the hill that floods
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

yes ok guys, in last while is has had a denco added and new alternator so weather somthing has been adjusted mistakenly.... not sure as never used to do 3 months ago. Shall get my mate to look at next week.. passing on your suggestions.

thanks
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 1443
Joined: Tue Apr 12, 2005 3:57 pm
Location: Brisbane

Post by vanbox »

Bingham wrote:yes ok guys, in last while is has had a denco added and new alternator so weather somthing has been adjusted mistakenly.... not sure as never used to do 3 months ago. Shall get my mate to look at next week.. passing on your suggestions.

thanks
put all this time and research into your patrol and you not have had it go bang :finger:
MUD BEERS and MAYHEM

DURAMAX POWERED GU
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

yes sorted it guys as said a small flat blade and 8 ml locking nut on the vacuum unit... got it down now sits between 900-1000. will drop down further to 800 tomoz.

much easier to fix than i supsected!
2015 200 Series Gx TTD - ................ Fark 3L's -
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests