I have put a LS1 in my 80 and im sorting the AC out, now i noticed that the AC lines have a little oil in them (to lube the pump i guess?) now when it gets regassed is the oil in the gas or is that something that we have to put back in ourselves??
also anyone got any tricks to get the ls lines to mate up to the 80 lines?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air Con questions
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Before you install the lines, condensor, etc... always try and pour as much oil as you can out of them. The oil is hydroscopic (attracts moisture), which is bad inside an aircon system.
As someone said before, the guy who regasses youre system will add more oil, but make sure you tell him that you have had most of the system apart, as they may just assume you have replaced a hose or something and doesnt need oil. You may as well get him to add dye too, helps a great deal when/if you need to trace any leaks.
As someone said before, the guy who regasses youre system will add more oil, but make sure you tell him that you have had most of the system apart, as they may just assume you have replaced a hose or something and doesnt need oil. You may as well get him to add dye too, helps a great deal when/if you need to trace any leaks.
Who is online
Users browsing this forum: No registered users and 1 guest